Перейти к содержанию

sos1g3

Members
  • Постов

    24
  • Зарегистрирован

  • Посещение

    Никогда

Достижения sos1g3

  1. а как же книжки из серии "Для чайников" ??? )))) Попробуй - http://www.knigka.info/2011/04/09/s-dlja-chajjnikov.-gukin-d jen-c-for.html
  2. Всем здравствуйте! Возникла необходмость сделать некоторую проверяющую систему задач попрограммированию.Суть в том что на сервере есть набор тестов,и на сервер посылается исходный код решения (далее сабмит) от пользователя. Нужно скомпилировать сабмит, и прогнать ево по всем тестам. Но... Возможен же и так называемый плохой сабмит (к примеру который будет читать набор тестов,лазить по папкам,ну и много всево более страшного можно придумать). Хотелось бы узнать про методы защиты от таких "плохих" сабмитов. Заранее спасибо за помощь =)
  3. Всем доброго времени суток! Поставил Slackware 12.1 с dvd диска =) Все поставилось замечательно, настроил кодировки,всё,принялся за настройку разрешения экрана. Так как slackware по умолчанию ставит мне 1024х768 (что жутко неудобно на ЖК 17 дюймов), то я сел как то это дело исправить. Полез в гугл,тем много по этому вопросу нушёл,но все проделанные операции не привели ни к какому результату... Хотелось бы всё таки исправить проблему. Мне нужно разрешение 1280х1024 (refresh rate не столь важен) Привожу свой xorg.conf : # File generated by xf86config. # # Copyright © 1999 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # NOTE: This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa # driver instead of the fbdev driver. Thanks to Kenneth Fanyo who pointed # this out to me. # This XF86Config file is designed for use with the VESA framebuffer. # This generic interface should work with nearly all video cards # (although not every card will support every resolution). # With the new driver, it should no longer be required to have frame buffer # support in the kernel, or to run it on the console. # # Enjoy! # -- volkerdi@slackware.com # # ********************************************************************** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ********************************************************************** # Section "Module" # This loads the DBE extension module. Load "dbe" # Double buffer extension # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection # This loads the font modules Load "type1" Load "freetype" #Load "speedo" # This loads the GLX module Load "glx" EndSection # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/share/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/share/fonts/local/" FontPath "/usr/share/fonts/misc/" FontPath "/usr/share/fonts/OTF/" FontPath "/usr/share/fonts/TTF/" FontPath "/usr/share/fonts/Type1/" FontPath "/usr/share/fonts/CID/" FontPath "/usr/share/fonts/Speedo/" FontPath "/usr/share/fonts/75dpi/:unscaled" FontPath "/usr/share/fonts/100dpi/:unscaled" FontPath "/usr/share/fonts/75dpi/" FontPath "/usr/share/fonts/100dpi/" FontPath "/usr/share/fonts/cyrillic/" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/" # ModulePath can be used to set a search path for the X server modules. # The default path is shown here. # ModulePath "/usr/lib/xorg/modules" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # Option "NoTrapSignals" # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence # (where n is 1 through 12). This allows clients to receive these key # events. # Option "DontVTSwitch" # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event. # Option "DontZap" # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events. # Option "DontZoom" # Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error. # Option "DisableVidModeExtension" # Uncomment this to enable the use of a non-local xvidtune client. # Option "AllowNonLocalXvidtune" # Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings. # Option "DisableModInDev" # Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset). # Option "AllowNonLocalModInDev" # Set the basic blanking screen saver timeout. # Option "blank time" "10" # 10 minutes # Set the DPMS timeouts. These are set here because they are global # rather than screen-specific. These settings alone don't enable DPMS. # It is enabled per-screen (or per-monitor), and even then only when # the driver supports it. # Option "standby time" "20" # Option "suspend time" "30" # Option "off time" "60" # On some platform the server needs to estimate the sizes of PCI # memory and pio ranges. This is done by assuming that PCI ranges # don't overlap. Some broken BIOSes tend to set ranges of inactive # devices wrong. Here one can adjust how aggressive the assumptions # should be. Default is 0. # Option "EstimateSizesAggresively" "0" EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Core keyboard's InputDevice section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "kbd" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. # Option "Protocol" "Xqueue" # Set the keyboard auto repeat parameters. Not all platforms implement # this. # Option "AutoRepeat" "500 5" # Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)). # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a European # keyboard, you will probably want to use one of: # # Option "XkbModel" "pc102" # Option "XkbModel" "pc105" # # If you have a Microsoft Natural keyboard, you can use: # # Option "XkbModel" "microsoft" # # If you have a US "windows" keyboard you will want: # # Option "XkbModel" "pc104" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # # Option "XkbLayout" "de" # # or: # # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # # Option "XkbOptions" "ctrl:swapcaps" # These are the default XKB settings for X.Org # # Option "XkbRules" "xorg" # Option "XkbModel" "pc105" Option "XkbLayout" "us,ru(winkeys)" # Option "XkbVariant" "" Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll" EndSection # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** Section "InputDevice" # Identifier and driver Identifier "Mouse1" Driver "mouse" # On platforms where PnP mouse detection is supported the following # protocol setting can be used when using a newer PnP mouse: # Option "Protocol" "Auto" # The available mouse protocols types that you can set below are: # Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2 # Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2 # MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse # ThinkingMouse ThinkingMousePS/2 Xqueue Option "Protocol" "auto" # The mouse device. The device is normally set to /dev/mouse, # which is usually a symbolic link to the real device. Option "Device" "/dev/mouse" # Option "Device" "/dev/psaux" # Option "Device" "/dev/ttyS0" # Option "Device" "/dev/ttyS1" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Option "Protocol" "Xqueue" # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. # Option "BaudRate" "9600" # Option "SampleRate" "150" # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" Option "ZAxisMapping" "4 5" EndSection # Some examples of extended input devices # Section "InputDevice" # Identifier "spaceball" # Driver "magellan" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "spaceball2" # Driver "spaceorb" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "touchscreen0" # Driver "microtouch" # Option "Device" "/dev/ttyS0" # Option "MinX" "1412" # Option "MaxX" "15184" # Option "MinY" "15372" # Option "MaxY" "1230" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # # Section "InputDevice" # Identifier "touchscreen1" # Driver "elo2300" # Option "Device" "/dev/ttyS0" # Option "MinX" "231" # Option "MaxX" "3868" # Option "MinY" "3858" # Option "MaxY" "272" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonThreshold" "17" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "My Monitor" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 31.5 - 75 # HorizSync 30-64 # multisync # HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 40-90 # 1280x1024 @ 70.00 Hz (GTF) hsync: 74.62 kHz; pclk: 128.94 MHz Modeline "1280x1024_70.00" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 -HSync +Vsync EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present Section "Device" Identifier "VESA Framebuffer" Driver "vesa" #VideoRam 4096 # Insert Clocks lines here if appropriate EndSection # ********************************************************************** # Screen sections # ********************************************************************** # Any number of screen sections may be present. Each describes # the configuration of a single screen. A single specific screen section # may be specified from the X server command line with the "-screen" # option. Section "Screen" Identifier "Screen 1" Device "VESA Framebuffer" Monitor "My Monitor" # If your card can handle it, a higher default color depth (like 24 or 32) # is highly recommended. # DefaultDepth 8 DefaultDepth 16 # DefaultDepth 24 # DefaultDepth 32 # "1024x768" is also a conservative usable default resolution. If you # have a better monitor, feel free to try resolutions such as # "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your # card/monitor can produce) Subsection "Display" Depth 8 Modes "1280x1024_70.00" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 16 Modes "1280x1024_70.00" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 24 Modes "1280x1024_70.00" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 32 Modes "1280x1024_70.00" "1024x768" "800x600" "640x480" EndSubsection EndSection # ********************************************************************** # ServerLayout sections. # ********************************************************************** # Any number of ServerLayout sections may be present. Each describes # the way multiple screens are organised. A specific ServerLayout # section may be specified from the X server command line with the # "-layout" option. In the absence of this, the first section is used. # When now ServerLayout section is present, the first Screen section # is used alone. Section "ServerLayout" # The Identifier line must be present Identifier "Simple Layout" # Each Screen line specifies a Screen section name, and optionally # the relative position of other screens. The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen. In this example, screen 2 is located to the # right of screen 1. Screen "Screen 1" # Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used. Those options include "CorePointer", "CoreKeyboard" and # "SendCoreEvents". InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard"
  4. ну вот как на моей системе было так =-) rc.font не было изначально,я создал его сам,пришлось прописывать в скрипт перехода на single user(первый лвл инита)...а вот скрипт который выставляет локаль я нашёл...вроде это /etc/profile.d/lang.sh и /etc/profile.d/lang.csh... Вообщем проблему я исправил =-) всё абсолютно настроил путём полуслепых тыканий и откатов системы =-))) (бэкапы рулят =-) ) Всем спасибо за ответы, вы мне очень помогли! =-)
  5. Ну вот получается устновить локаль и сделать раскладку клавиатуры =-),но... Вся эта красота не сохраняется...и вот каад грузишь кде занова,т.е. вводишь startx то всё приходится настраивать снова =-(((
  6. user@user:~# echo $LANG en_US мда действительно язык английский... но,скажу вам что своими лично руками ставил пакеты из kdei(в описании было написано типо international language support for kde) и вержиме выбора пакетов отметил там пакет для кде(название Цитата: kde-i18n-ru и такой же для кдешного офиса)...када первый раз запустил кде то выбрал русский язык... да и в меню "Язык и стандарты" там стоит единственный русский язык... Logitech M-BT58 это модель мышки... ------------------------------------------------------------ ---- Далее... Идёт речь о любых директориях... Единственное имеется небольшое различие =-) Вот например корневая ФС показывает вместо руских имён вопросики(EXT3),собственно таково же типа только смонтированная для чтения ФС под мандриву2009,только вот там вместо русских символов реальные иероглифы,далее,ntfs с виндовсом и прочим (всево три диска) полностью отказываются даже показывать директории и файлы с русскими именами.... xev уверенно игнорировал моя движения колесиком мыши...либо мышка отказывалась что то говорить =-).уж не скажете ли вы мне что колёсико моё накрылось =-) просто я бы тоже сделал такой вывод если бы недавно не загрузив винду проверил это колёсико,работало без единого отклонения =-)
  7. Ну я вобщем поставил слаквар версии 12.1 с двд диска... Загрузил...Всё хорошо раюотает, кде радует глаз,только вот думал ща буду настраивать под себя(ну там fstab править,раскладки,пользователя создам...)Но вот список таво чево мне не удалось =-) : 1.Установка русской раскладки...Нашёл информацию по этому поводу...Все как один говорят что вот нужно править xorg.conf.Я поправил,неполучилось,потом сделал абсолютный копи-паст,всё равно после рестарта ничево не происходило...Ну вот прочитал на всем известном Opennet что на самом деле после рестарта иксов нужно ещё запустить kxkb...Но такую вещ я не нашёл...хоть и перерыл весь контрол центер...Нашёл канешно такую вещь типо настройки раскладки клавы в меню...но максмум что выжал оттуда так это меняю язык только на понелке рядом с часами кликаньем ужасно неудобно =-( 2.ну далее у меня не отображаются русские папки в менеджерах...Так же проблема с заголовками окон некоторых...Есть подозрения что нету "ютф-8" так собственно вопрос,как её поставить? 3.и меня ещё интересует такая вещь как калёсико на мышке...Опять же прописывал в xorg всё что требуется,толко вот ничево не работает... а без нево жуть как не удобно =-) вот... Извиняюсь что так много...просто всё что накипело за пару дней безрезультатных попыток настройки =-)...Единственное сеть удлось самому поднять =-)и всё =-) Заранее спасибо...
  8. насколько мне известно дот нэт версии 2.0 ставится на wine 1.1.16...только вот я незнаю какой дот нэт нужен для VS2008...
  9. хм... неужели это реальная причина чтоб отказаться от линукса либо это реальный стимул изучить линукс
  10. Лучше уж раз в два года переставлять винду чем учится использовать linux(если вам нужно запускать только приложения виндовса)... Потому что если вы плохо разбираетесь в linux'е то вам придётся переустанавливать ещё чаще...
  11. ну вот у меня окола часиков висит так называмый "net applet" и если клацнуть правой кнопочкой мыши на нево то мона увидеть там строку меню "VPN подключения" и там мона и создат и удалить...ричём всё абсолютно просто...мона даж разобраься прочитав встроенный хелп...
  12. ну если у вас gnome то "компьютер" можно перенести драг дропом н рабочий стол из меню "переход" ... Сетевое окружение оно представлено в виде такой штуки как "Net applet" её можно встретить около часов...два раза клинкув на неё можете увидет список сетевых подключений...и если что не так там же можна и настроить...но вот как именно на раб стол вынести ненаю...
  13. sos1g3

    SDL

    Спасибо большое за помощь!помогло =-)
  14. sos1g3

    SDL

    Захотел поставитьб эмулятор...Из исходников... Посморел Readme...Прочитал что нужно, какие пакеты...проверил...всё на месте... В частности нужен был SDL 1.1.3... [user@localhost gens]$ sudo urpmi SDL Пакет libSDL1.2_0-1.2.13-10mdv2009.0.i586 уже установлен и вот запускаю конфиг ... checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... no checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... none checking dependency style of gcc... none checking whether gcc and cc understand -c and -o together... yes checking for library containing strerror... none required checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for pkg-config... /usr/bin/pkg-config checking for GTK+ - version >= 2.4.0... yes (version 2.14.3) checking for sdl-config... no checking for SDL - version >= 1.1.3... no *** The sdl-config script installed by SDL could not be found *** If SDL was installed in PREFIX, make sure PREFIX/bin is in *** your path, or set the SDL_CONFIG environment variable to the *** full path to sdl-config. configure: error: *** SDL version 1.1.3 not found! как так???что нужно установить тогда?какой пакет?
  15. не ну за это канеш спасибо... но всё таки можно поподробнее пожалуста... или хотяб где прочитат про это... потому что для мандривы я таково не нашёл =-((( но ведб можно же сделать как нибудь так чтобы оно работало... или нельзя??? ok,тему мона закрыть =-) метеодом тыка нашел этот sudoers file...
×
×
  • Создать...