yuranich Опубликовано 27 сентября, 2004 Жалоба Поделиться Опубликовано 27 сентября, 2004 Стоит 2 процесорный сервак Xeon. На нем постоянно запущем KDE. Открыта консоль, и некое запущенное приложение выдает отладочную инф-цию в эту консоль. Все это работает постоянно. Проблемма: Раз в 2 недели X-server намертво виснет. Раньше при использовании атишных дров вис 1 раз в неделю. вот log: XFree86 Version 4.2.0 (Custom Build: 4.2.0-8.2asp) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.9-31smp i686 [ELF] Build Host: pylesos.asp-linux.com.ua Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Thu Sep 16 13:05:01 2004 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "HP 56 Monito" (**) | |-->Device "ATI Mach64 3D Rage IIC" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbModel" "pc101" (**) XKB: model: "pc101" (**) Option "XkbLayout" "ru" (**) XKB: layout: "ru" (**) Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll" (**) XKB: options: "grp:ctrl_shift_toggle,grp_led:scroll" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "unix/:7100" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8000300c, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1166,0008 card 0000,0000 rev 21 class 06,00,00 hdr 80 (II) PCI: 00:00:1: chip 1166,0008 card 0000,0000 rev 01 class 06,00,00 hdr 80 (II) PCI: 00:00:2: chip 1166,0006 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:00:3: chip 1166,0006 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:06:0: chip 8086,1229 card 103c,10ca rev 08 class 02,00,00 hdr 00 (II) PCI: 00:07:0: chip 1002,4759 card 103c,10c4 rev 7a class 03,00,00 hdr 00 (II) PCI: 00:0f:0: chip 1166,0200 card 1166,0200 rev 4f class 06,01,00 hdr 80 (II) PCI: 00:0f:1: chip 1166,0211 card 0000,0000 rev 00 class 01,01,8a hdr 80 (II) PCI: 04:02:0: chip 103c,1219 card 103c,0001 rev 0d class 08,80,00 hdr 80 (II) PCI: 04:02:1: chip 103c,121a card 103c,0001 rev 09 class 0c,06,00 hdr 80 (II) PCI: 04:03:0: chip 8086,0964 card 0000,0000 rev 02 class 06,04,00 hdr 81 (II) PCI: 04:03:1: chip 8086,1960 card 103c,10cc rev 09 class 0e,00,01 hdr 80 (II) PCI: 05:04:0: chip 1011,0046 card 103c,10c2 rev 01 class 01,04,00 hdr 00 (II) PCI: 05:07:0: chip 9004,8078 card 103c,10c8 rev 02 class 01,00,00 hdr 00 (II) PCI: 05:08:0: chip 103c,10c1 card 103c,0001 rev a0 class 08,80,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) Host-to-PCI bridge: (II) Host-to-PCI bridge: (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x00000000 - 0x0000ffff (0x10000) IX (II) Bus 0 non-prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX (II) Bus 0 prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX (II) Bus 4: bridge is at (0:0:1), (-1,4,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 4 I/O range: [0] -1 0x00000000 - 0x0000ffff (0x10000) IX (II) Bus 4 non-prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX (II) Bus 4 prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX (II) Bus -1: bridge is at (0:0:2), (-1,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: [0] -1 0x00000000 - 0x0000ffff (0x10000) IX (II) Bus -1 non-prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX (II) Bus -1 prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX (II) Bus -1: bridge is at (0:0:3), (-1,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: [0] -1 0x00000000 - 0x0000ffff (0x10000) IX (II) Bus -1 non-prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX (II) Bus -1 prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX (II) Bus -1: bridge is at (0:15:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (II) Bus 5: bridge is at (4:3:0), (4,5,5), BCTRL: 0x07 (VGA_EN is cleared) (II) Bus 5 I/O range: [0] -1 0x00005000 - 0x000050ff (0x100) IX [1] -1 0x00005400 - 0x000054ff (0x100) IX [2] -1 0x00005800 - 0x000058ff (0x100) IX [3] -1 0x00005c00 - 0x00005cff (0x100) IX (II) Bus 5 non-prefetchable memory range: [0] -1 0xf5000000 - 0xf50fffff (0x100000) MX (II) Bus 5 prefetchable memory range: (--) PCI:*(0:7:0) ATI Mach64 GY rev 122, Mem @ 0xf1000000/24, 0xf0802000/12, I/O @ 0x1400/8 (II) Setting vga for screen 0. (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) VESA(0): initializing int10 (II) VESA(0): Primary V_BIOS segment is: 0xc000 (II) VESA(0): VESA BIOS detected (II) VESA(0): VESA VBE Version 2.0 (II) VESA(0): VESA VBE Total Mem: 2048 kB (II) VESA(0): VESA VBE OEM: ATI MACH64 (II) VESA(0): VESA VBE OEM Software Rev: 1.0 (II) VESA(0): VESA VBE OEM Vendor: ATI Technologies Inc. (II) VESA(0): VESA VBE OEM Product: MACH64GT (II) VESA(0): VESA VBE OEM Product Rev: 01.00 (**) VESA(0): Depth 16, (--) framebuffer bpp 16 (==) VESA(0): RGB weight 565 (==) VESA(0): Default visual is TrueColor (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0) (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) VESA(0): VESA VBE DDC supported (II) VESA(0): VESA VBE DDC Level 2 (II) VESA(0): VESA VBE DDC transfer in appr. 2 sec. (II) VESA(0): VESA VBE DDC read successfully (II) VESA(0): Manufacturer: HWP Model: 12bb Serial#: 14738152 (II) VESA(0): Year: 2001 Week: 47 (II) VESA(0): EDID Version: 1.2 (II) VESA(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V (II) VESA(0): Sync: Separate (II) VESA(0): Max H-Image Size [cm]: horiz.: 28 vert.: 21 (II) VESA(0): Gamma: 2.60 (II) VESA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) VESA(0): redX: 0.625 redY: 0.340 greenX: 0.310 greenY: 0.592 (II) VESA(0): blueX: 0.150 blueY: 0.063 whiteX: 0.283 whiteY: 0.299 (II) VESA(0): Supported VESA Video Modes: (II) VESA(0): 720x400@70Hz (II) VESA(0): 640x480@75Hz (II) VESA(0): 800x600@75Hz (II) VESA(0): 1024x768@60Hz (II) VESA(0): Manufacturer's mask: 0 (II) VESA(0): Supported Future Video Modes: (II) VESA(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) VESA(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) VESA(0): Supported additional Video Mode: (II) VESA(0): clock: 25.2 MHz Image Size: 280 x 210 mm (II) VESA(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0 (II) VESA(0): v_active: 400 v_sync: 412 v_sync_end 414 v_blanking: 449 v_border: 0 (II) VESA(0): Monitor name: HP 56 Monitor (II) VESA(0): Serial No: CN14738152 (II) VESA(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 54 kHz, PixClock max 70 MHz (==) VESA(0): DPI set to (75, 75) (II) VESA(0): Searching for matching VESA mode(s): (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a (II) VESA(0): initializing int10 (II) VESA(0): Primary V_BIOS segment is: 0xc000 (II) VESA(0): VESA BIOS detected (II) VESA(0): VESA VBE Version 2.0 (II) VESA(0): VESA VBE Total Mem: 2048 kB (II) VESA(0): VESA VBE OEM: ATI MACH64 (II) VESA(0): VESA VBE OEM Software Rev: 1.0 (II) VESA(0): VESA VBE OEM Vendor: ATI Technologies Inc. (II) VESA(0): VESA VBE OEM Product: MACH64GT (II) VESA(0): VESA VBE OEM Product Rev: 01.00 (==) VESA(0): Write-combining range (0xf1000000,0x200000) virtual address = 0x7e7000 - physical address = 0xf1000000 - size = 2097152 (==) VESA(0): Default visual is TrueColor (**) VESA(0): DPMS enabled AUDIT: Fri Sep 24 08:49:40 2004: 1116 X: client 19 rejected from local host (WW) Open APM failed (/dev/apm_bios) (No such device) (WW) Open APM failed (/dev/apm_bios) (No such device) (WW) Open APM failed (/dev/apm_bios) (No such device) (WW) Open APM failed (/dev/apm_bios) (No such device) (WW) Open APM failed (/dev/apm_bios) (No such device) (WW) Open APM failed (/dev/apm_bios) (No such device) (WW) Open APM failed (/dev/apm_bios) (No such device) (WW) Open APM failed (/dev/apm_bios) (No such device) (WW) Open APM failed (/dev/apm_bios) (No such device) (WW) Open APM failed (/dev/apm_bios) (No such device) (WW) Open APM failed (/dev/apm_bios) (No such device) (WW) Open APM failed (/dev/apm_bios) (No such device) (WW) Open APM failed (/dev/apm_bios) (No such device) Цитата Ссылка на комментарий Поделиться на другие сайты Поделиться
Рекомендуемые сообщения
Присоединяйтесь к обсуждению
Вы можете написать сейчас и зарегистрироваться позже. Если у вас есть аккаунт, авторизуйтесь, чтобы опубликовать от имени своего аккаунта.