Перейти к содержанию

проблемка с VirtualBox


Рекомендуемые сообщения

Вот, при запуске виртуальной машины выдает такое..

VirtualBox kernel driver not installed. The vboxdrv kernel module was either not loaded or /dev/vboxdrv was not created for some reason. Please install the virtualbox-ose-modules package for your kernel and execute '/etc/init.d/vboxdrv start' as root.

VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).

Код ошибки:

0x80004005

Компонент:

Console

Интерфейс:

IConsole {1dea5c4b-0753-4193-b909-22330f64ec45}

Ядрище 2.6.22-2-amd64

В консоли пишет

# virtualbox

WARNING: The character device /dev/vboxdrv does not exist.

Please install the virtualbox-ose-modules package for your kernel.

You will not be able to start VMs until this problem is fixed.

виртуалбокс-осе-модулес стоят вроде бы

Ссылка на комментарий
Поделиться на другие сайты

MirgoN писал(а) Thu, 22 November 2007 16:02

Вот, при запуске виртуальной машины выдает такое..

VirtualBox kernel driver not installed. The vboxdrv kernel module was either not loaded or /dev/vboxdrv was not created for some reason. Please install the virtualbox-ose-modules package for your kernel and execute '/etc/init.d/vboxdrv start' as root.

VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).

Код ошибки:

0x80004005

Компонент:

Console

Интерфейс:

IConsole {1dea5c4b-0753-4193-b909-22330f64ec45}

Ядрище 2.6.22-2-amd64

В консоли пишет

# virtualbox

WARNING: The character device /dev/vboxdrv does not exist.

Please install the virtualbox-ose-modules package for your kernel.

You will not be able to start VMs until this problem is fixed.

виртуалбокс-осе-модулес стоят вроде бы

/etc/init.d/vboxdrv setup

Для начала.

Ссылка на комментарий
Поделиться на другие сайты

вот, файла такого нету, но я зашел в папку и увидел похожий...

# /etc/init.d/vboxdrv setup

bash: /etc/init.d/vboxdrv: Нет такого файла или каталога

# /etc/init.d/vboxdrv.dpkg-new setup

* Usage: /etc/init.d/vboxdrv.dpkg-new {start|stop|restart|status}

# /etc/init.d/vboxdrv.dpkg-new start

# /etc/init.d/vboxdrv.dpkg-new start

Starting VirtualBox kernel module: vboxdrvFATAL: Module vboxdrv not found.

* Modprobe vboxdrv failed. Please use 'dmesg' to find out why.

# dmesg

Linux version 2.6.22-2-amd64 (Debian 2.6.22-4) (waldi@debian.org) (gcc version 4

.1.3 20070812 (prerelease) (Debian 4.1.2-15)) #1 SMP Thu Aug 30 23:43:59 UTC 200

7

Command line: root=/dev/sda3 ro

BIOS-provided physical RAM map:

BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)

BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)

BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data)

BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS)

BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)

Entering add_active_range(0, 0, 159) 0 entries of 3200 used

Entering add_active_range(0, 256, 262096) 1 entries of 3200 used

end_pfn_map = 1048576

DMI present.

ACPI: RSDP 000F96D0, 0014 (r0 ACPIAM)

ACPI: RSDT 3FFD0000, 003C (r1 020807 RSDT1716 20070208 MSFT 97)

ACPI: FACP 3FFD0200, 0084 (r2 020807 FACP1716 20070208 MSFT 97)

ACPI: DSDT 3FFD0430, 44A0 (r1 1ADNC 1ADNCB33 B33 INTL 20051117)

ACPI: FACS 3FFDE000, 0040

ACPI: APIC 3FFD0390, 005C (r1 020807 APIC1716 20070208 MSFT 97)

ACPI: MCFG 3FFD03F0, 003C (r1 020807 OEMMCFG 20070208 MSFT 97)

ACPI: OEMB 3FFDE040, 0071 (r1 020807 OEMB1716 20070208 MSFT 97)

ACPI: HPET 3FFD48D0, 0038 (r1 020807 OEMHPET 20070208 MSFT 97)

ACPI: SSDT 3FFD4910, 028A (r1 A M I POWERNOW 1 AMD 1)

Scanning NUMA topology in Northbridge 24

No NUMA configuration found

Faking a node at 0000000000000000-000000003ffd0000

Entering add_active_range(0, 0, 159) 0 entries of 3200 used

Entering add_active_range(0, 256, 262096) 1 entries of 3200 used

Bootmem setup node 0 0000000000000000-000000003ffd0000

Zone PFN ranges:

DMA 0 -> 4096

DMA32 4096 -> 1048576

Normal 1048576 -> 1048576

early_node_map[2] active PFN ranges

0: 0 -> 159

0: 256 -> 262096

On node 0 totalpages: 261999

DMA zone: 56 pages used for memmap

DMA zone: 1019 pages reserved

DMA zone: 2924 pages, LIFO batch:0

DMA32 zone: 3527 pages used for memmap

DMA32 zone: 254473 pages, LIFO batch:31

Normal zone: 0 pages used for memmap

ATI board detected. Disabling timer routing over 8254.

ACPI: PM-Timer IO Port: 0x808

ACPI: Local APIC address 0xfee00000

ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

Processor #0 (Bootup-CPU)

ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)

Processor #1

ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23

ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)

ACPI: IRQ0 used by override.

ACPI: IRQ2 used by override.

ACPI: IRQ9 used by override.

Setting APIC routing to flat

ACPI: HPET id: 0x8300 base: 0xfed00000

Using ACPI (MADT) for SMP configuration information

swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000

swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000

swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000

Allocating PCI resources starting at 50000000 (gap: 40000000:bff80000)

SMP: Allowing 2 CPUs, 0 hotplug CPUs

PERCPU: Allocating 37896 bytes of per cpu data

Built 1 zonelists. Total pages: 257397

Kernel command line: root=/dev/sda3 ro

Initializing CPU#0

PID hash table entries: 4096 (order: 12, 32768 bytes)

Marking TSC unstable due to TSCs unsynchronized

time.c: Detected 2509.371 MHz processor.

Console: colour VGA+ 80x25

Checking aperture...

CPU 0: aperture @ c010000000 size 32 MB

Aperture too small (32 MB)

No AGP bridge found

Memory: 1023868k/1048384k available (2009k kernel code, 24128k reserved, 945k da

ta, 296k init)

Calibrating delay using timer specific routine.. 5145.48 BogoMIPS (lpj=10290979)

Security Framework v1.0.0 initialized

SELinux: Disabled at boot.

Capability LSM initialized

Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)

Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)

Mount-cache hash table entries: 256

CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)

CPU: L2 Cache: 512K (64 bytes/line)

CPU 0/0 -> Node 0

CPU: Physical Processor ID: 0

CPU: Processor Core ID: 0

SMP alternatives: switching to UP code

ACPI: Core revision 20070126

Using local APIC timer interrupts.

result 12546853

Detected 12.546 MHz APIC timer.

SMP alternatives: switching to SMP code

Booting processor 1/2 APIC 0x1

Initializing CPU#1

Calibrating delay using timer specific routine.. 4988.09 BogoMIPS (lpj=9976198)

CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)

CPU: L2 Cache: 512K (64 bytes/line)

CPU 1/1 -> Node 0

CPU: Physical Processor ID: 0

CPU: Processor Core ID: 1

AMD Athlon 64 X2 Dual Core Processor 4800+ stepping 01

Brought up 2 CPUs

migration_cost=264

NET: Registered protocol family 16

ACPI: bus type pci registered

PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved

PCI: Not using MMCONFIG.

PCI: Using configuration type 1

ACPI: Interpreter enabled

ACPI: (supports S0 S1 S3 S4 S5)

ACPI: Using IOAPIC for interrupt routing

Error attaching device data

Error attaching device data

ACPI: PCI Root Bridge [PCI0] (0000:00)

PCI: Probing PCI hardware (bus 00)

PCI: Transparent bridge - 0000:00:14.4

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]

ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)

ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 10 11 12 14 15)

ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)

ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)

ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.

ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.

ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)

ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.

Linux Plug and Play Support v0.97 © Adam Belay

pnp: PnP ACPI init

ACPI: bus type pnp registered

pnp: ACPI device : hid PNP0A03

pnp: ACPI device : hid PNP0200

pnp: ACPI device : hid PNP0B00

pnp: ACPI device : hid PNP0800

pnp: ACPI device : hid PNP0C04

pnp: ACPI device : hid PNP0700

pnp: ACPI device : hid PNP0400

pnp: ACPI device : hid PNP0103

pnp: ACPI device : hid PNP0C02

pnp: ACPI device : hid PNP0C02

pnp: ACPI device : hid PNP0303

pnp: ACPI device : hid PNP0F03

pnp: ACPI device : hid PNP0C02

pnp: ACPI device : hid PNP0C02

pnp: ACPI device : hid PNP0C01

pnp: PnP ACPI: found 15 devices

ACPI: ACPI bus type pnp unregistered

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

PCI: Using ACPI for IRQ routing

PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report

NET: Registered protocol family 8

NET: Registered protocol family 20

hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0

hpet0: 4 32-bit timers, 14318180 Hz

ACPI: RTC can wake from S4

pnp: the driver 'system' has been registered

pnp: match found with the PnP device '00:08' and the driver 'system'

pnp: 00:08: iomem range 0xfec00000-0xfec00fff has been reserved

pnp: 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved

pnp: match found with the PnP device '00:09' and the driver 'system'

pnp: 00:09: iomem range 0xffb80000-0xffbfffff has been reserved

pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserved

pnp: match found with the PnP device '00:0c' and the driver 'system'

pnp: 00:0c: ioport range 0x600-0x6df has been reserved

pnp: 00:0c: ioport range 0xae0-0xaef has been reserved

pnp: match found with the PnP device '00:0d' and the driver 'system'

pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved

pnp: match found with the PnP device '00:0e' and the driver 'system'

pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved

pnp: 00:0e: iomem range 0xc0000-0xcffff has been reserved

pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved

pnp: 00:0e: iomem range 0x100000-0x3fffffff could not be reserved

PCI: Bridge: 0000:00:02.0

IO window: d000-dfff

MEM window: fc000000-feafffff

PREFETCH window: d0000000-dfffffff

PCI: Bridge: 0000:00:07.0

IO window: e000-efff

MEM window: feb00000-febfffff

PREFETCH window: disabled.

PCI: Bridge: 0000:00:14.4

IO window: disabled.

MEM window: disabled.

PREFETCH window: disabled.

PCI: Setting latency timer of device 0000:00:02.0 to 64

PCI: Setting latency timer of device 0000:00:07.0 to 64

NET: Registered protocol family 2

Time: hpet clocksource has been installed.

IP route cache hash table entries: 32768 (order: 6, 262144 bytes)

TCP established hash table entries: 131072 (order: 9, 3145728 bytes)

TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

TCP: Hash tables configured (established 131072 bind 65536)

TCP reno registered

checking if image is initramfs... it is

Freeing initrd memory: 5535k freed

audit: initializing netlink socket (disabled)

audit(1195744683.648:1): initialized

VFS: Disk quotas dquot_6.5.1

Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

io scheduler noop registered

io scheduler anticipatory registered

io scheduler deadline registered

io scheduler cfq registered (default)

Boot video device is 0000:01:00.0

PCI: Setting latency timer of device 0000:00:02.0 to 64

assign_interrupt_mode Found MSI capability

Allocate Port Service[0000:00:02.0:pcie00]

PCI: Setting latency timer of device 0000:00:07.0 to 64

assign_interrupt_mode Found MSI capability

Allocate Port Service[0000:00:07.0:pcie00]

Real Time Clock Driver v1.12ac

hpet_resources: 0xfed00000 is busy

Linux agpgart interface v0.102 © Dave Jones

Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

pnp: the driver 'serial' has been registered

RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize

pnp: the driver 'i8042 kbd' has been registered

pnp: match found with the PnP device '00:0a' and the driver 'i8042 kbd'

pnp: the driver 'i8042 aux' has been registered

pnp: match found with the PnP device '00:0b' and the driver 'i8042 aux'

PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12

serio: i8042 KBD port at 0x60,0x64 irq 1

serio: i8042 AUX port at 0x60,0x64 irq 12

mice: PS/2 mouse device common for all mice

TCP bic registered

NET: Registered protocol family 1

NET: Registered protocol family 17

Freeing unused kernel memory: 296k freed

input: AT Translated Set 2 keyboard as /class/input/input0

ACPI: duty_cycle spans bit 4

ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver

ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16

ohci_hcd 0000:00:13.0: OHCI Host Controller

ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1

ohci_hcd 0000:00:13.0: irq 16, io mem 0xfbffe000

usb usb1: configuration #1 chosen from 1 choice

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

SCSI subsystem initialized

libata version 2.21 loaded.

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

pnp: the driver 'ide' has been registered

Floppy drive(s): fd0 is 1.44M

FDC 0 is a post-1991 82077

ACPI: PCI Interrupt 0000:00:13.1 -> GSI 17 (level, low) -> IRQ 17

ohci_hcd 0000:00:13.1: OHCI Host Controller

ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2

ohci_hcd 0000:00:13.1: irq 17, io mem 0xfbffd000

usb usb2: configuration #1 chosen from 1 choice

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 2 ports detected

ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18

ohci_hcd 0000:00:13.2: OHCI Host Controller

ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3

ohci_hcd 0000:00:13.2: irq 18, io mem 0xfbffc000

usb usb3: configuration #1 chosen from 1 choice

hub 3-0:1.0: USB hub found

hub 3-0:1.0: 2 ports detected

ACPI: PCI Interrupt 0000:00:13.3 -> GSI 17 (level, low) -> IRQ 17

ohci_hcd 0000:00:13.3: OHCI Host Controller

ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4

ohci_hcd 0000:00:13.3: irq 17, io mem 0xfbffb000

usb usb4: configuration #1 chosen from 1 choice

hub 4-0:1.0: USB hub found

hub 4-0:1.0: 2 ports detected

ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18

ohci_hcd 0000:00:13.4: OHCI Host Controller

ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5

ohci_hcd 0000:00:13.4: irq 18, io mem 0xfbffa000

usb usb5: configuration #1 chosen from 1 choice

hub 5-0:1.0: USB hub found

hub 5-0:1.0: 2 ports detected

usb 3-1: new full speed USB device using ohci_hcd and address 2

r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded

ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19

PCI: Setting latency timer of device 0000:02:00.0 to 64

eth0: RTL8101e at 0xffffc200005f6000, 00:19:db:72:04:32, IRQ 19

ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19

ehci_hcd 0000:00:13.5: EHCI Host Controller

ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6

ehci_hcd 0000:00:13.5: debug port 1

ehci_hcd 0000:00:13.5: irq 19, io mem 0xfbfff000

ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

usb usb6: configuration #1 chosen from 1 choice

hub 6-0:1.0: USB hub found

hub 6-0:1.0: 10 ports detected

ahci 0000:00:12.0: version 2.2

ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22

ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit

usb 3-1: new full speed USB device using ohci_hcd and address 3

usb 3-1: configuration #1 chosen from 1 choice

ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode

ahci 0000:00:12.0: flags: ncq ilck led clo pmp pio

scsi0 : ahci

scsi1 : ahci

scsi2 : ahci

scsi3 : ahci

ata1: SATA max UDMA/133 cmd 0xffffc200005fa900 ctl 0x0000000000000000 bmdma 0x00

00000000000000 irq 22

ata2: SATA max UDMA/133 cmd 0xffffc200005fa980 ctl 0x0000000000000000 bmdma 0x00

00000000000000 irq 22

ata3: SATA max UDMA/133 cmd 0xffffc200005faa00 ctl 0x0000000000000000 bmdma 0x00

00000000000000 irq 22

ata4: SATA max UDMA/133 cmd 0xffffc200005faa80 ctl 0x0000000000000000 bmdma 0x00

00000000000000 irq 22

ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

ata1.00: ATA-7: ST3160815AS, 3.AAC, max UDMA/133

ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)

ata1.00: configured for UDMA/133

ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

ata2.00: ATAPI: Optiarc DVD RW AD-7173S, 1-00, max UDMA/66

ata2.00: configured for UDMA/66

ata3: SATA link down (SStatus 0 SControl 300)

ata4: SATA link down (SStatus 0 SControl 300)

scsi 0:0:0:0: Direct-Access ATA ST3160815AS 3.AA PQ: 0 ANSI: 5

scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7173S 1-00 PQ: 0 ANSI: 5

SB600_PATA: IDE controller at PCI slot 0000:00:14.1

ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16

SB600_PATA: chipset revision 0

SB600_PATA: not 100% native mode: will probe irqs later

ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:pio, hdb:pio

Probing IDE interface ide0...

sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)

sd 0:0:0:0: [sda] Write Protect is off

sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO

or FUA

sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)

sd 0:0:0:0: [sda] Write Protect is off

sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO

or FUA

sda: sda1 sda2 < sda5 sda6 sda7 > sda3

sd 0:0:0:0: [sda] Attached SCSI disk

sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray

Uniform CD-ROM driver Revision: 3.20

sr 1:0:0:0: Attached scsi CD-ROM sr0

sd 0:0:0:0: Attached scsi generic sg0 type 0

sr 1:0:0:0: Attached scsi generic sg1 type 5

kjournald starting. Commit interval 5 seconds

EXT3-fs: mounted filesystem with ordered data mode.

usbcore: registered new interface driver usbserial

drivers/usb/serial/usb-serial.c: USB Serial support registered for generic

usbcore: registered new interface driver usbserial_generic

drivers/usb/serial/usb-serial.c: USB Serial Driver core

piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device

drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303

pl2303 3-1:1.0: pl2303 converter detected

usb 3-1: pl2303 converter now attached to ttyUSB0

usbcore: registered new interface driver pl2303

drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver

ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16

input: ImPS/2 Generic Wheel Mouse as /class/input/input1

pnp: the driver 'parport_pc' has been registered

pnp: match found with the PnP device '00:06' and the driver 'parport_pc'

parport_pc 00:06: reported by Plug and Play ACPI

parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]

input: PC Speaker as /class/input/input2

hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...

EXT3 FS on sda3, internal journal

loop: module loaded

device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com

kjournald starting. Commit interval 5 seconds

EXT3-fs warning: maximal mount count reached, running e2fsck is recommended

EXT3 FS on sda7, internal journal

EXT3-fs: mounted filesystem with ordered data mode.

NTFS driver 2.1.28 [Flags: R/W MODULE].

NTFS volume version 3.1.

NTFS-fs error (device sda5): load_system_files(): Volume is dirty. Mounting rea d-only. Run chkdsk and mount in Windows.

r8169: eth0: link up

r8169: eth0: link up

NET: Registered protocol family 10

lo: Disabled Privacy Extensions

input: Power Button (FF) as /class/input/input3

ACPI: Power Button (FF) [PWRF]

input: Power Button (CM) as /class/input/input4

ACPI: Power Button (CM) [PWRB]

lp0: using parport0 (interrupt-driven).

ppdev: user-space parallel port driver

eth0: no IPv6 routers present

nvidia: module license 'NVIDIA' taints kernel.

ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18

PCI: Setting latency timer of device 0000:01:00.0 to 64

NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.23 Thu Oct 4 10:27:34 P DT 2007

hda-intel: Invalid position buffer, using LPIB read method instead.

Вот, что тут искать я не понял

Ссылка на комментарий
Поделиться на другие сайты

/etc/init.d/vboxdrv --help

Usage: /etc/init.d/vboxdrv {start|stop|restart|status|setup}

У меня есть.

Тогда говорите какая ОС, какая версия Virtual Box.

Ссылка на комментарий
Поделиться на другие сайты

Установил, запустил, поставил винду, и что, там не работает сеть, даже не пингуется...Большая машина т.е. не с виртуалки все нормлаьно по локалке путешествует и по нету... а виртуальная машина нет...

ЗЫ поставил винду... хп.. настройки знаю наизусть.... все настроил как на обычной винде... но вот проблема с некоторыми настройками сети даже пакеты не передаются...

как настроить?! помогите...

Ссылка на комментарий
Поделиться на другие сайты

В VirtualBox три типа сетевых карт, все они расписаны в документации. С каким типом проблемы?

Ссылка на комментарий
Поделиться на другие сайты

Читайте документацию.

а) NAT не требует настройки.

б) NAT не умеет соединять хост-машину и гость-машину.

Ссылка на комментарий
Поделиться на другие сайты

мне не надо их соединять, мне надо выйти в мою домашнюю локалку, это возможно? Embarassed и в сеть, но это уже далее

Ссылка на комментарий
Поделиться на другие сайты

Да, возможно, если только у вас не PPPOE.

Настройте сеть как NAT и под виндой настройте ее по DHCP.

Идите.

Ссылка на комментарий
Поделиться на другие сайты

Цитата:

мне надо выйти в мою домашнюю локалку, это возможно?

да. если не ошибаюсь, для этого на хосте настраивается бридж.

Ссылка на комментарий
Поделиться на другие сайты

У меня роутер... у нему 4 компа... от него уже PPPOE

я дхцп сервер отключил на роутере...я настроил ему фиксированный айпишник...

Сейчас попробую ещё пару раз

Ссылка на комментарий
Поделиться на другие сайты

MirgoN писал(а) Fri, 23 November 2007 00:22

я дхцп сервер отключил на роутере...я настроил ему фиксированный айпишник...

Не имеет значения - у VirtualBox собственный DHCP сервер.

Читайте документацию.

Ссылка на комментарий
Поделиться на другие сайты

  • 2 месяца спустя...
The VirtualBox kernel driver is not accessible to the current user. Make sure that the user has write permissions for /dev/vboxdrv by adding them to the vboxusers groups. You will need to logout for the change to take effect..
VBox status code: -1909 (VERR_VM_DRIVER_NOT_ACCESSIBLE).


Код ошибки: 
0x80004005
Компонент: 
Console
Интерфейс: 
IConsole {1dea5c4b-0753-4193-b909-22330f64ec45}

 

от чего это?
ubuntu 7.0.4
ядро последней версии!!!
Ссылка на комментарий
Поделиться на другие сайты

Присоединяйтесь к обсуждению

Вы можете написать сейчас и зарегистрироваться позже. Если у вас есть аккаунт, авторизуйтесь, чтобы опубликовать от имени своего аккаунта.

Гость
Ответить в этой теме...

×   Вставлено с форматированием.   Вставить как обычный текст

  Разрешено использовать не более 75 эмодзи.

×   Ваша ссылка была автоматически встроена.   Отображать как обычную ссылку

×   Ваш предыдущий контент был восстановлен.   Очистить редактор

×   Вы не можете вставлять изображения напрямую. Загружайте или вставляйте изображения по ссылке.

Загрузка...
×
×
  • Создать...