Jump to content
Sign in to follow this  
Zoldan

SAMBA не пускает с другой сети

Recommended Posts

Доброго времнени суток.

Беда! Win домен, сеть порядка 300 машин winXP и 7. Сеть разбита на несколько сегментов, соединенных между собой по VPN. Почти в каждом сегменте есть свой домен контроллер, привязанный к сайту сегмента сети.

В этом всем безобразии есть Linux сервер занимающийся приемом факсов. Принятые факсы он складывает в расшаренную SAMB'ой шару.

Беда вот в чем. Если пользователь заходит с тойже сети в которой находится SAMBA, то все ок, а если с любой другой, то может пройти только пару вложенных папок, а при заходе в папку с факсами exsplorer благополучно вешается, и в конце коцев выдает сообщение что доступ не может быть получен.... и ниже "не найдено имя группы"

Linux машина в домене, группы и пользователей получает вроде нормально

## Browsing/Identification ### # Change this to the workgroup/NT-domain name your Samba server will part of workgroup = RDS realm = RDS.LAN local master = no preferred master = no # server string is the equivalent of the NT Description field server string = %h server (Samba, Ubuntu) # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable its WINS Server # wins support = no # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # This will prevent nmbd to search for NetBIOS names through DNS. dns proxy = no # What naming service and in what order should we use to resolve host names # to IP addresses ; name resolve order = lmhosts host wins bcast #### Networking #### # The specific set of interfaces / networks to bind to # This can be either the interface name or an IP address/netmask; # interface names are normally preferred ; interfaces = 127.0.0.0/8 eth0 hosts allow = 192.168. # Only bind to the named interfaces and/or networks; you must use the # 'interfaces' option above to use this. # It is recommended that you enable this feature if your Samba machine is # not protected by a firewall or is a firewall itself. However, this # option cannot handle dynamic or non-broadcast interfaces correctly. ; bind interfaces only = yes #### Debugging/Accounting #### # This tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/log.%m # Cap the size of the individual log files (in KiB). max log size = 1000 # If you want Samba to only log through syslog then set the following # parameter to 'yes'. # syslog only = no # We want Samba to log a minimum amount of information to syslog. Everything # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log # through syslog you should set the following parameter to something higher. syslog = 0 # Do something sensible when Samba crashes: mail the admin a backtrace panic action = /usr/share/samba/panic-action %d ####### Authentication ####### # "security = user" is always a good idea. This will require a Unix account # in this server for every user accessing the server. See # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html # in the samba-doc package for details. security = ADS auth methods = winbind password server = dc-01.rds.lan, dc-02.rds.lan, dc-03.rds.lan, dc-05.rds.lan # You may wish to use password encryption. See the section on # 'encrypt passwords' in the smb.conf(5) manpage before enabling. encrypt passwords = true dns proxy = no socket options = TCP_NODELAY # If you are using encrypted passwords, Samba will need to know what # password database type you are using.  passdb backend = tdbsam obey pam restrictions = yes # This boolean parameter controls whether Samba attempts to sync the Unix # password with the SMB password when the encrypted SMB password in the # passdb is changed. unix password sync = yes # For Unix password sync to work on a Debian GNU/Linux system, the following # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for # sending the correct chat script for the passwd program in Debian Sarge). passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . # This boolean controls whether PAM will be used for password changes # when requested by an SMB client instead of the program listed in # 'passwd program'. The default is 'no'. pam password change = yes # This option controls how unsuccessful authentication attempts are mapped  # to anonymous connections map to guest = bad user ########## Domains ########### # Is this machine able to authenticate users. Both PDC and BDC # must have this setting enabled. If you are the BDC you must # change the 'domain master' setting to no # ; domain logons = yes # # The following setting only takes effect if 'domain logons' is set # It specifies the location of the user's profile directory # from the client point of view) # The following required a [profiles] share to be setup on the # samba server (see below) ; logon path = \\%N\profiles\%U # Another common choice is storing the profile in the user's home directory # (this is Samba's default) # logon path = \\%N\%U\profile # The following setting only takes effect if 'domain logons' is set # It specifies the location of a user's home directory (from the client # point of view) ; logon drive = H: # logon home = \\%N\%U # The following setting only takes effect if 'domain logons' is set # It specifies the script to run during logon. The script must be stored # in the [netlogon] share # NOTE: Must be store in 'DOS' file format convention ; logon script = logon.cmd # This allows Unix users to be created on the domain controller via the SAMR # RPC pipe. The example command creates a user account with a disabled Unix # password; please adapt to your needs ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u # This allows machine accounts to be created on the domain controller via the  # SAMR RPC pipe.  # The following assumes a "machines" group exists on the system ; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u # This allows Unix groups to be created on the domain controller via the SAMR # RPC pipe.  ; add group script = /usr/sbin/addgroup --force-badname %g ########## Printing ########## # If you want to automatically load your printer list rather # than setting them up individually then you'll need this # load printers = yes # lpr(ng) printing. You may wish to override the location of the # printcap file ; printing = bsd ; printcap name = /etc/printcap # CUPS printing. See also the cupsaddsmb(8) manpage in the # cupsys-client package. ; printing = cups ; printcap name = cups ############ Misc ############ # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /home/samba/etc/smb.conf.%m # Most people will find that this option gives better performance. # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html # for details # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 # socket options = TCP_NODELAY # The following parameter is useful only if you have the linpopup package # installed. The samba maintainer and the linpopup maintainer are # working to ease installation and configuration of linpopup and samba. ; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' & # Domain Master specifies Samba to be the Domain Master Browser. If this # machine will be configured as a BDC (a secondary logon server), you # must set this to 'no'; otherwise, the default behavior is recommended. domain master = no local master = no preferred master = no os level = 0 domain logons = no # Some defaults for winbind (make sure you're not using the ranges # for something else.) idmap uid = 10000-40000 idmap gid = 10000-40000 winbind use default domain = yes winbind refresh tickets = yes case sensitive = No ; template shell = /bin/bash # The following was the default behaviour in sarge, # but samba upstream reverted the default because it might induce # performance issues in large organizations. # See Debian bug #368251 for some of the consequences of *not* # having this setting and smb.conf(5) for details. winbind enum groups = yes winbind enum users = yes # Setup usershare options to enable non-root users to share folders # with the net usershare command. # Maximum number of usershare. 0 (default) means that usershare is disabled. ; usershare max shares = 100 # Allow users who've been granted usershare privileges to create # public shares, not just authenticated ones # usershare allow # guestsкуакrefresh # guest account = guest # [Входящие факсы] browseable = yes path = /home/tux/FAX/incoming guest ok = Yes valid users = "@RDS\Пользователи домена" read list = "@RDS\Пользователи домена" write list = "@RDS\FAX_RW" create mask = 664 directory mask = 664 force group = "@RDS\FAX_RW" readonly = No [share] browseable = yes #valid users = "@RDS\Администраторы домена" #write list = "@RDS\Администраторы домена" #read list = "@RDS\Администраторы домена" path = /home/tux/share readonly = no directory mask = 666 guest ok = Yes [TEST] browseable = yes path = /home/tux/TEST readonly = no guest ok = yes

Расшаренна папка incoming, в ней есть папка 2012->Февраль->тут файлы с факсами *.tif Нормально доходит до папки "Январь", а при входе в нее все виснит

Помогите, где копать?

Samba 3.4.7, ubuntu 10.04 server

Вообщем заметил такую странность, если папка пустая, то открывается, если там 4-10 файлов (на разных компах проявляется по разному), то не пускает...

вот что в логе:

[2012/02/29 09:17:29, 1] smbd/service.c:1063(make_connection_snum)

dc-02 (192.168.15.7) connect to service Входящие факсы initially as user RDS\druide (uid=10500, gid=10261) (pid 6098)

[2012/02/29 09:17:59, 1] smbd/service.c:1240(close_cnum)

dc-02 (192.168.15.7) closed connection to service Входящие факсы

[2012/02/29 09:17:59, 0] lib/util_sock.c:539(read_fd_with_timeout)

[2012/02/29 09:17:59, 0] lib/util_sock.c:1498(get_peer_addr_internal)

getpeername failed. Error was Transport endpoint is not connected

read_fd_with_timeout: client 0.0.0.0 read error = Connection reset by peer.

[2012/02/29 09:18:11, 1] smbd/service.c:1063(make_connection_snum)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...