Jump to content
Алекс-n3050

Удаление драйвера rtl8812au

Recommended Posts

Мне необходимо удалить драйвер rtl8812au или его запретить.

Драйвер нашел (см. листинг dmesg - выделено bold), пытаюсь удалить:

При попытке удаления rtl8812au следующей командой

sudo dkms uninstall -m rtl8812au -v 4.3.8_12175.20140902

выдает ответ:

Error! The module/version combo: rtl8812au-4.3.8_12175.20140902

is not located in the DKMS tree.

Для этого драйвера почему-то зарезервировано имя wlan0, но оно почему-то

переименовывается в wlan1. Где этот драйвер находится физически?

Как запретить его использование или присвоить ему интерфейс wlan0.

У меня с интерфейсом wlan1 почему-то не авторизуется на точке доступа .

 

Фрагменты команды dmesg:

[   20.173019] usb 1-3: 3:1: cannot get freq at ep 0x84
[   20.176016] usb 1-3: 3:1: cannot get freq at ep 0x84
[   20.189001] usb 1-3: 3:1: cannot get freq at ep 0x84
[   20.191995] usb 1-3: 3:1: cannot get freq at ep 0x84
[  242.367573] usb 10-1: USB disconnect, device number 2
[  250.879763] usb 10-1: new high-speed USB device number 4 using xhci_hcd
[  251.009566] usb 10-1: New USB device found, idVendor=0bda, idProduct=8812
[  251.009570] usb 10-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  251.009572] usb 10-1: Product: 802.11n NIC
[  251.009574] usb 10-1: Manufacturer: Realtek
[  251.009576] usb 10-1: SerialNumber: 123456
[  251.047102] cfg80211: World regulatory domain updated:
[  251.047106] cfg80211:  DFS Master region: unset
[  251.047108] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  251.047111] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  251.047113] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  251.047115] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[  251.047117] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  251.047118] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  251.047773] RTL871X: module init start
[  251.047777] RTL871X: rtl8812au v4.3.8_12175.20140902
[  251.047778] RTL871X: build time: May 26 2018 20:40:01
[  251.671423] RTL871X: rtw_ndev_init(wlan0)
[  251.671648] usbcore: registered new interface driver rtl8812au
[  251.671650] RTL871X: module init ret=0
[  251.678369] rtl8812au 10-1:1.0 wlan1: renamed from wlan0
[  251.688723] systemd-udevd[7354]: renamed network interface wlan0 to wlan1
[  258.431205] RTL871X: rtw_set_802_11_connect(wlan1)  fw_state=0x00000008
[  258.502884] RTL871X: start auth
[  264.505959] RTL871X: rtw_set_802_11_connect(wlan1)  fw_state=0x00000008
[  264.544423] RTL871X: start auth
 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...