Dont_Shoot
-
Постов
6 -
Зарегистрирован
-
Посещение
Никогда
Сообщения, опубликованные Dont_Shoot
-
-
Вот мой xorg.conf
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,ru"
Option "XkbVariant" ",winkeys"
Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies Inc ATI Default Card"
Driver "fglrx"
Busid "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
Horizsync 31.5-81.1
Vertrefresh 56-76
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc ATI Default Card"
Monitor "Generic Monitor"
Defaultdepth 24
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Module"
Load "glx"
EndSection
-
При подключении принтера, система его определяет, видит, дает задание на печать, но сам принтер никак на это не реагирует. Читал здесь здесьпро абсолютно идентичную проблему, пробовал решение - не получается. Там советуют скачать прошивку командой getweb 1020 (допустим для принтера Р1020), соответственно на getweb 1006 - выдает ошибку. В общем, суть проблемы - надо найти где-то прошивку под этот принтер, где искать понятия не имею и гугл тут не рулит =(
-
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
Horizsync 31.5-81.1
Vertrefresh 56-76
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc ATI Default Card"
Monitor "Generic Monitor"
Defaultdepth 24
EndSection
"Безопасного" файла нет
Монитор ЖК 19" NEC MultySync LCD195NX
-
После установки проприетарного драйвера Убунту автоматом выставил мне FullHD разрешение, хотя монитор мой явно этого не может =) в своей сессии я поставил нормальное, но при загрузке, до того как я зайду в свою сессию, монитор колбасит и он пытается подстроиться. Ввел в xorg,conf верные horizontal & vertical sync - не помогло.
-
При запуске КДЕ все отображается некорректно, какие-то кислотные цвета, все зернит. Это проблема с дровами? xorg.conf по мере возможности настроил. Я линухолох, думал начну со Слакваря, буду учиться. А тут такая подстава что даже КДЕ не запустить (кстати даже пингвины, которые сидят в консоли наверху, тоже зернистые и кислотные =)), пришлось пока убунту ставить, но хочется освоить именно Слакварь.
Некорректное разрешение при экране приветствия
в Ubuntu
Опубликовано
не помогло =(