[nut powercom USB не взлетает]

#uname -rp8.1-RELEASE-p1 i386

определяется как:

Oct 29 12:02:45 ttys kernel: ugen0.2: <POWERCOM Co.,LTD> at usbus0Oct 29 12:02:46 ttys root: Unknown USB device: vendor 0x0d9f product 0x0004 bus uhub0Oct 29 12:02:46 ttys kernel: uhid0: <POWERCOM Co.,LTD HID UPS Battery, class 0/0, rev 1.10/0.01, addr 2> on usbus0

# usbconfigugen0.1: <UHCI root HUB VIA> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ONugen1.1: <UHCI root HUB VIA> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ONugen2.1: <UHCI root HUB VIA> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ONugen3.1: <EHCI root HUB VIA> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ONugen0.2: <HID UPS Battery POWERCOM Co.,LTD> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON

с родным драйвером говорит:

#/usr/local/etc/rc.d/nut startNetwork UPS Tools - UPS driver controller 2.4.1Network UPS Tools - PowerCom protocol UPS driver 0.12 (2.4.1)tcgetattr(/dev/ugen0.2): Inappropriate ioctl for deviceDriver failed to start (exit status=1)/usr/local/etc/rc.d/nut: WARNING: failed precmd routine for nut

при выборе Megatec выдаёт это:

# /usr/local/etc/rc.d/nut startNetwork UPS Tools - UPS driver controller 2.4.1Network UPS Tools - Megatec protocol driver 1.6 (2.4.1)Serial-over-USB transport layer 0.10No supported devices found. Please check your device availability with 'lsusb'and make sure you have an up-to-date version of NUT. If this does not help,try running the driver with at least 'vendorid' and 'subdriver' optionsspecified. Please refer to the man page for details about these options(man 8 megatec_usb).Please report your results to the NUT user's mailing list<nut-upsuser@lists.alioth.debian.org>.Driver failed to start (exit status=1)/usr/local/etc/rc.d/nut: WARNING: failed precmd routine for nut

уже с портами баловался:

/usr/local/etc/rc.d/nut startNetwork UPS Tools - UPS driver controller 2.4.1Network UPS Tools - PowerCom protocol UPS driver 0.12 (2.4.1)tcgetattr(/dev/usb/0.2.0): Inappropriate ioctl for deviceDriver failed to start (exit status=1)/usr/local/etc/rc.d/nut: WARNING: failed precmd routine for nut

или

Network UPS Tools - UPS driver controller 2.4.1Network UPS Tools - PowerCom protocol UPS driver 0.12 (2.4.1)tcgetattr(/dev/ugen0.2): Inappropriate ioctl for deviceDriver failed to start (exit status=1)/usr/local/etc/rc.d/nut: WARNING: failed precmd routine for nut