Jump to content

p0rtve1n

Members
  • Content Count

    1
  • Joined

  • Last visited

    Never
  1. Нашел старый тв-тюнер... tvtime пишет Cannot open capture device /dev/video0 Что делать не знаю облазел кучу форумов, результата нету. при вводе: modprobe bttv пишет WARNING: All config files need .conf: /etc/modprobe.d/bt878, it will be ignored in a future release.WARNING: All config files need .conf: /etc/modprobe.d/bttv, it will be ignored in a future release.WARNING: All config files need .conf: /etc/modprobe.d/alsa-modindex, it will be ignored in a future release.WARNING: All config files need .conf: /etc/modprobe.d/blacklist-cups, it will be ignored in a future release.WARNING: All config files need .conf: /etc/modprobe.d/local, it will be ignored in a future release.FATAL: Error inserting bttv (/lib/modules/3.0.38-std-def-alt0.M60P.1/kernel/drivers/media/video/bt8xx/bttv.ko): Unknown symbol in module, or unknown parameter (see dmesg) lspci 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01)00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01)00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01)00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)02:00.0 Ethernet controller: Atheros Communications AR8132 Fast Ethernet (rev c0)03:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)03:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) Вроде видит все... при попытке установить bttv-0.9.15 # make installstrip --strip-debug video-buf.o v4l1-compat.o v4l2-common.o btcx-risc.o ir-common.o bttv.o ir-common.o tuner.o tda9887.o msp3400.o tvaudio.o tvmixer.ostrip: 'video-buf.o': No such filestrip: 'v4l1-compat.o': No such filestrip: 'v4l2-common.o': No such filestrip: 'btcx-risc.o': No such filestrip: 'ir-common.o': No such filestrip: 'bttv.o': No such filestrip: 'ir-common.o': No such filestrip: 'tuner.o': No such filestrip: 'tda9887.o': No such filestrip: 'msp3400.o': No such filestrip: 'tvaudio.o': No such filestrip: 'tvmixer.o': No such filemake: *** [install] Ошибка 1[root@techlab4 bttv-0.9.15]# makemake -C /lib/modules/3.0.38-std-def-alt0.M60P.1/build SUBDIRS=/home/dlyasin/bttv-0.9.15 modulesmake: *** /lib/modules/3.0.38-std-def-alt0.M60P.1/build: No such file or directory. Stop.make: *** [default] Ошибка 2 3.0.38-std-def-alt0.M60P.1 - Устанавливал... # dmesg | grep bttv[ 8.558822] bttv: Unknown parameter `secam'[ 7580.334893] bttv: Unknown parameter `secam'[10569.489319] bttv: Unknown parameter `secam'[10569.506575] bttv: Unknown parameter `secam'[10611.512290] bttv: Unknown parameter `secam'[10611.538692] bttv: Unknown parameter `secam'[10653.978201] bttv: Unknown parameter `secam'[10654.002196] bttv: Unknown parameter `secam'[10690.566346] bttv: Unknown parameter `secam'[10883.308923] bttv: Unknown parameter `secam'[10883.342309] bttv: Unknown parameter `secam'[10997.501081] bttv: Unknown parameter `secam'[12260.864245] bttv: Unknown parameter `secam'[12260.882728] bttv: Unknown parameter `secam'[12282.319540] bttv: Unknown parameter `secam'[12282.335033] bttv: Unknown parameter `secam' Помогите пожалуйста и объясните, т.к. новичок.
×
×
  • Create New...