Jump to content
Sign in to follow this  
p0rtve1n

Acorp TV-Tuner+FM Y878F

Recommended Posts

Нашел старый тв-тюнер... tvtime пишет Cannot open capture device /dev/video0

Что делать не знаю облазел кучу форумов, результата нету.

при вводе: modprobe bttv пишет

WARNING: All config files need .conf: /etc/modprobe.d/bt878, it will be ignored in a future release.WARNING: All config files need .conf: /etc/modprobe.d/bttv, it will be ignored in a future release.WARNING: All config files need .conf: /etc/modprobe.d/alsa-modindex, it will be ignored in a future release.WARNING: All config files need .conf: /etc/modprobe.d/blacklist-cups, it will be ignored in a future release.WARNING: All config files need .conf: /etc/modprobe.d/local, it will be ignored in a future release.FATAL: Error inserting bttv (/lib/modules/3.0.38-std-def-alt0.M60P.1/kernel/drivers/media/video/bt8xx/bttv.ko): Unknown symbol in module, or unknown parameter (see dmesg)

lspci

00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01)00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01)00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01)00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)02:00.0 Ethernet controller: Atheros Communications AR8132 Fast Ethernet (rev c0)03:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)03:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)

Вроде видит все...

при попытке установить bttv-0.9.15

# make installstrip --strip-debug video-buf.o v4l1-compat.o v4l2-common.o btcx-risc.o ir-common.o bttv.o ir-common.o tuner.o tda9887.o msp3400.o tvaudio.o tvmixer.ostrip: 'video-buf.o': No such filestrip: 'v4l1-compat.o': No such filestrip: 'v4l2-common.o': No such filestrip: 'btcx-risc.o': No such filestrip: 'ir-common.o': No such filestrip: 'bttv.o': No such filestrip: 'ir-common.o': No such filestrip: 'tuner.o': No such filestrip: 'tda9887.o': No such filestrip: 'msp3400.o': No such filestrip: 'tvaudio.o': No such filestrip: 'tvmixer.o': No such filemake: *** [install] Ошибка 1[root@techlab4 bttv-0.9.15]# makemake -C /lib/modules/3.0.38-std-def-alt0.M60P.1/build SUBDIRS=/home/dlyasin/bttv-0.9.15 modulesmake: *** /lib/modules/3.0.38-std-def-alt0.M60P.1/build: No such file or directory.  Stop.make: *** [default] Ошибка 2

3.0.38-std-def-alt0.M60P.1 - Устанавливал...

# dmesg | grep bttv[    8.558822] bttv: Unknown parameter `secam'[ 7580.334893] bttv: Unknown parameter `secam'[10569.489319] bttv: Unknown parameter `secam'[10569.506575] bttv: Unknown parameter `secam'[10611.512290] bttv: Unknown parameter `secam'[10611.538692] bttv: Unknown parameter `secam'[10653.978201] bttv: Unknown parameter `secam'[10654.002196] bttv: Unknown parameter `secam'[10690.566346] bttv: Unknown parameter `secam'[10883.308923] bttv: Unknown parameter `secam'[10883.342309] bttv: Unknown parameter `secam'[10997.501081] bttv: Unknown parameter `secam'[12260.864245] bttv: Unknown parameter `secam'[12260.882728] bttv: Unknown parameter `secam'[12282.319540] bttv: Unknown parameter `secam'[12282.335033] bttv: Unknown parameter `secam'

Помогите пожалуйста и объясните, т.к. новичок.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...