permission denied

Уточнение по результатам самых последних экспериментов: пингуются все адреса, кроме удалённого. И, похоже, не работает разрешение имён узлов, т. е. ссылка http://217.23.144.36/ открывается нормально, пинг и трассировка на неё тоже проходит, а на запрос в виде http://www.linux.ru/ получаю ответ : "unknown host name". И так со всеми узлами.

даю как есть: [root@host root]# /usr/sbin/pppd call gprs Serial connection established. Using interface ppp0 Connect: ppp0 <--> /dev/ttyUSB0 local IP address 172.27.189.139 remote IP address 192.168.254.254 primary DNS address 217.119.94.4 secondary DNS address 217.119.95.2 [root@host root]# /sbin/route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.254.254 * 255.255.255.255 UH 0 0 0 ppp0 169.254.0.0 * 255.255.0.0 U 0 0 0 lo 127.0.0.0 * 255.0.0.0 U 0 0 0 lo default * 0.0.0.0 U 0 0 0 ppp0 default 192.168.254.254 0.0.0.0 UG 0 0 0 ppp0 [root@host root]# /sbin/iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination [root@host root]#

Ситуация такая: дозваниваюсь по модему до провайдера, устанавливается соединение, он даёт мне свой IP адрес, мой локальный айпишник, и адреса DNS. А дальше что ни делаю, вообще никуда попасть не могу: ни по одному адресу пакеты не идут, не пингуется ни один удалённый адрес, соответственно в инет тоже не выйти. Таблица маршрутизации после установки соединения перестраивается, фаервол вообще отключен. Где могут быть грабли ?

Даю после: (то что в /etc/fstab, насколько я знаю Linux, к usbserial имеет отношение ну очень отдалённое, а тем более разделы NTFS, это сейчас не является проблемой.) modprobe usbserial modprobe pl2303 dmesg: > 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ21 -> 0:21 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. PCI: Using ACPI for IRQ routing vesafb: probe of vesafb0 failed with error -6 Machine check exception polling timer started. Starting balanced_irq audit: initializing netlink socket (disabled) audit(1128720934.875:0): initialized udf: registering filesystem Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) ACPI: Thermal Zone [THRM] (46 C) Linux agpgart interface v0.100 © Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA hda: ST3120026A, ATA DISK drive hdb: IC35L020AVER07-0, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive hdd: IC35L020AVER07-0, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > hdb: max request size: 128KiB hdb: 40188960 sectors (20576 MB) w/1916KiB Cache, CHS=42528/15/63, UDMA(100) hdb: hdb1 hdb2 hdd: max request size: 128KiB hdd: 40188960 sectors (20576 MB) w/1916KiB Cache, CHS=42528/15/63, UDMA(100) hdd: hdd1 hdd2 libata version 1.02 loaded. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 Advanced Linux Sound Architecture Driver Version 1.0.4 (Mon May 17 14:31:44 2004 UTC). ALSA device list: No soundcards found. oprofile: using NMI interrupt. NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) ip_conntrack version 2.1 (4095 buckets, 32760 max) - 300 bytes per conntrack ip_tables: © 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/ arp_tables: © 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 Software Suspend has malfunctioning SMP support. Disabled ACPI: (supports S0 S1 S4 S5) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 176k freed Real Time Clock Driver v1.12 ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96 ehci_hcd 0000:00:1d.7: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr ehci_hcd 0000:00:1d.7: capability 0001 at 68 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 201, pci mem e082c000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 ehci_hcd 0000:00:1d.7: supports USB remote wakeup usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: default language 0x0409 usb usb1: Product: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller usb usb1: Manufacturer: Linux 2.6.7-ck2 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: hotplug usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: hotplug hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: ganged power switching hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: Single TT hub 1-0:1.0: TT requires at most 8 FS bit times hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: enabling power on all ports USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:00:1d.0: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 169, io base 0000e300 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: detected 2 ports usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: default language 0x0409 usb usb2: Product: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 usb usb2: Manufacturer: Linux 2.6.7-ck2 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: hotplug usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: hotplug hub 1-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x501 hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: local power source is good uhci_hcd 0000:00:1d.1: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 hub 1-0:1.0: port 1 not reset yet, waiting 50ms PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 193, io base 0000e000 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: detected 2 ports usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: default language 0x0409 usb usb3: Product: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 usb usb3: Manufacturer: Linux 2.6.7-ck2 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: hotplug usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: hotplug ehci_hcd 0000:00:1d.7: port 1 high speed ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT usb 1-1: new high speed USB device using address 2 hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 3-0:1.0: standalone hub usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: default language 0x0409 usb 1-1: Product: Flash Disk hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: individual port over-current protection hub 3-0:1.0: power on to power good time: 2ms hub 3-0:1.0: local power source is good usb 1-1: Manufacturer: USB uhci_hcd 0000:00:1d.2: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 usb 1-1: SerialNumber: FCA4B93FF261E01F usb 1-1: hotplug usb 1-1: adding 1-1:1.0 (config #1, interface 0) usb 1-1:1.0: hotplug ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 177, io base 0000e100 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 1-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x501 Initializing USB Mass Storage driver... usb-storage 1-1:1.0: usb_probe_interface usb-storage 1-1:1.0: usb_probe_interface - got id uhci_hcd 0000:00:1d.2: detected 2 ports usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: default language 0x0409 usb usb4: Product: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 usb usb4: Manufacturer: Linux 2.6.7-ck2 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: hotplug scsi0 : SCSI emulation for USB Mass Storage devices Vendor: Generic Model: USB Disk Flash Rev: 2.00 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 USB Mass Storage device found at 2 usbcore: registered new driver usb-storage USB Mass Storage support registered. SCSI device sda: 511488 512-byte hdwr sectors (262 MB) sda: assuming Write Enabled sda: assuming drive cache: write through sda: unknown partition table Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 ehci_hcd 0000:00:1d.7: port 2 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s usb usb4: adding 4-0:1.0 (config #1, interface 0) usb 4-0:1.0: hotplug hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 4-0:1.0: standalone hub hub 4-0:1.0: no power switching (usb 1.0) hub 4-0:1.0: individual port over-current protection hub 4-0:1.0: power on to power good time: 2ms hub 4-0:1.0: local power source is good hub 1-0:1.0: debounce: port 3: delay 100ms stable 4 status 0x501 uhci_hcd 0000:00:1d.3: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 hub 1-0:1.0: port 3 not reset yet, waiting 50ms PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: irq 169, io base 0000e200 uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: detected 2 ports usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: default language 0x0409 usb usb5: Product: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 usb usb5: Manufacturer: Linux 2.6.7-ck2 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb usb5: hotplug usb usb5: adding 5-0:1.0 (config #1, interface 0) usb 5-0:1.0: hotplug hub 5-0:1.0: usb_probe_interface hub 5-0:1.0: usb_probe_interface - got id hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected hub 5-0:1.0: standalone hub hub 5-0:1.0: no power switching (usb 1.0) hub 5-0:1.0: individual port over-current protection hub 5-0:1.0: power on to power good time: 2ms hub 5-0:1.0: local power source is good ehci_hcd 0000:00:1d.7: port 3 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT uhci_hcd 0000:00:1d.0: port 2 portsc 0093 hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s hub 2-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x101 usb 2-2: new full speed USB device using address 2 usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: default language 0x0409 usb 2-2: Product: USB-Serial Controller usb 2-2: Manufacturer: Prolific Technology Inc. usb 2-2: hotplug usb 2-2: adding 2-2:1.0 (config #1, interface 0) usb 2-2:1.0: hotplug uhci_hcd 0000:00:1d.1: port 1 portsc 0093 hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic usbserial 2-2:1.0: usb_probe_interface usbserial 2-2:1.0: usb_probe_interface - got id usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 drivers/usb/serial/usb-serial.c: USB Serial support registered for PL-2303 pl2303 2-2:1.0: usb_probe_interface pl2303 2-2:1.0: usb_probe_interface - got id pl2303 2-2:1.0: PL-2303 converter detected usb 2-2: PL-2303 converter now attached to ttyUSB0 (or usb/tts/0 for devfs) usbcore: registered new driver pl2303 drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.10 hub 3-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101 EXT3 FS on hda5, internal journal usb 3-1: new full speed USB device using address 2 device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com usb 3-1: new device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-1: hotplug usb 3-1: adding 3-1:1.0 (config #1, interface 0) usb 3-1:1.0: hotplug hub 3-1:1.0: usb_probe_interface hub 3-1:1.0: usb_probe_interface - got id hub 3-1:1.0: USB hub found hub 3-1:1.0: 2 ports detected hub 3-1:1.0: standalone hub hub 3-1:1.0: individual port power switching hub 3-1:1.0: individual port over-current protection hub 3-1:1.0: power on to power good time: 100ms hub 3-1:1.0: hub controller current requirement: 100mA hub 3-1:1.0: 400mA bus power budget for children hub 3-1:1.0: enabling power on all ports ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC hub 1-0:1.0: port 2, status 0000, change 0001, 12 Mb/s ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC hub 1-0:1.0: port 3, status 0000, change 0001, 12 Mb/s uhci_hcd 0000:00:1d.2: suspend_hc uhci_hcd 0000:00:1d.3: suspend_hc Unable to load NLS charset iso8859-1 Unable to load NLS charset iso8859-1 kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: hda7: found reiserfs format "3.6" with standard journal ReiserFS: hda7: using ordered data mode ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda7: checking transaction log (hda7) ReiserFS: hda7: Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. SGI XFS with ACLs, security attributes, realtime, no debug enabled XFS mounting filesystem hdb2 Ending clean XFS mount for filesystem: hdb2 NTFS driver 2.1.14 [Flags: R/O MODULE]. NTFS-fs warning (device hda1): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future. NTFS volume version 3.0. NTFS-fs warning (device hda2): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future. NTFS volume version 3.0. NTFS-fs warning (device hdd2): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future. NTFS volume version 3.0. Supermount version 2.0.4 for kernel 2.6 Adding 516088k swap on /mnt/swap/x/pagefile.sys. Priority:-1 extents:1 Adding 516088k swap on /mnt/swap/y/pagefile.sys. Priority:-2 extents:2 parport0: PC-style at 0x378 [PCSPP(,...)] inserting floppy driver for 2.6.7-ck2 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 8139too Fast Ethernet driver 0.9.27 eth0: RealTek RTL8139 at 0xd000, 00:04:61:6d:e6:65, IRQ 225 eth0: Identified 8139 chip type 'RTL-8100B/8139D' 8139too Fast Ethernet driver 0.9.27 eth0: RealTek RTL8139 at 0xd000, 00:04:61:6d:e6:65, IRQ 225 eth0: Identified 8139 chip type 'RTL-8100B/8139D' apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. parport0: PC-style at 0x378 [PCSPP(,...)] lp0: using parport0 (polling).

до modprobe. В моём случае разницы никакой - что так, что эдак не работает. Модули usbserial, pl2303 абсолютно точно.

1. Под виндой пашет 100%. на той же машине. 2. А что туда можно послать, чтобы убедиться, что всё работает. ATZ ? Из десятка 100% рабочих скритпов именно под Siemens S55 у меня не заработал ни один. 3. dmesg: > 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ21 -> 0:21 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. PCI: Using ACPI for IRQ routing vesafb: probe of vesafb0 failed with error -6 Machine check exception polling timer started. Starting balanced_irq audit: initializing netlink socket (disabled) audit(1128717824.874:0): initialized udf: registering filesystem Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) ACPI: Thermal Zone [THRM] (46 C) Linux agpgart interface v0.100 © Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA hda: ST3120026A, ATA DISK drive hdb: IC35L020AVER07-0, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive hdd: IC35L020AVER07-0, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > hdb: max request size: 128KiB hdb: 40188960 sectors (20576 MB) w/1916KiB Cache, CHS=42528/15/63, UDMA(100) hdb: hdb1 hdb2 hdd: max request size: 128KiB hdd: 40188960 sectors (20576 MB) w/1916KiB Cache, CHS=42528/15/63, UDMA(100) hdd: hdd1 hdd2 libata version 1.02 loaded. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 Advanced Linux Sound Architecture Driver Version 1.0.4 (Mon May 17 14:31:44 2004 UTC). ALSA device list: No soundcards found. oprofile: using NMI interrupt. NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) ip_conntrack version 2.1 (4095 buckets, 32760 max) - 300 bytes per conntrack ip_tables: © 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/ arp_tables: © 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 Software Suspend has malfunctioning SMP support. Disabled ACPI: (supports S0 S1 S4 S5) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 176k freed Real Time Clock Driver v1.12 ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96 ehci_hcd 0000:00:1d.7: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr ehci_hcd 0000:00:1d.7: capability 0001 at 68 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 201, pci mem e082c000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 ehci_hcd 0000:00:1d.7: supports USB remote wakeup usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: default language 0x0409 usb usb1: Product: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller usb usb1: Manufacturer: Linux 2.6.7-ck2 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: hotplug usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: hotplug hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: ganged power switching hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: Single TT hub 1-0:1.0: TT requires at most 8 FS bit times hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: enabling power on all ports USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:00:1d.0: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 169, io base 0000e300 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: detected 2 ports usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: default language 0x0409 usb usb2: Product: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 usb usb2: Manufacturer: Linux 2.6.7-ck2 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: hotplug usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: hotplug hub 1-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x501 hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: local power source is good uhci_hcd 0000:00:1d.1: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 hub 1-0:1.0: port 1 not reset yet, waiting 50ms PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 193, io base 0000e000 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: detected 2 ports usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: default language 0x0409 usb usb3: Product: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 usb usb3: Manufacturer: Linux 2.6.7-ck2 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: hotplug usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: hotplug ehci_hcd 0000:00:1d.7: port 1 high speed ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT usb 1-1: new high speed USB device using address 2 hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: individual port over-current protection hub 3-0:1.0: power on to power good time: 2ms hub 3-0:1.0: local power source is good usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: default language 0x0409 usb 1-1: Product: Flash Disk usb 1-1: Manufacturer: USB usb 1-1: SerialNumber: FCA4B93FF261E01F usb 1-1: hotplug uhci_hcd 0000:00:1d.2: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 usb 1-1: adding 1-1:1.0 (config #1, interface 0) usb 1-1:1.0: hotplug ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 177, io base 0000e100 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: detected 2 ports usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: default language 0x0409 usb usb4: Product: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 usb usb4: Manufacturer: Linux 2.6.7-ck2 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: hotplug Initializing USB Mass Storage driver... usb-storage 1-1:1.0: usb_probe_interface usb-storage 1-1:1.0: usb_probe_interface - got id usb usb4: adding 4-0:1.0 (config #1, interface 0) usb 4-0:1.0: hotplug scsi0 : SCSI emulation for USB Mass Storage devices Vendor: Generic Model: USB Disk Flash Rev: 2.00 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 USB Mass Storage device found at 2 usbcore: registered new driver usb-storage USB Mass Storage support registered. hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 4-0:1.0: standalone hub hub 4-0:1.0: no power switching (usb 1.0) hub 4-0:1.0: individual port over-current protection hub 4-0:1.0: power on to power good time: 2ms hub 4-0:1.0: local power source is good uhci_hcd 0000:00:1d.3: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 hub 1-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x501 SCSI device sda: 511488 512-byte hdwr sectors (262 MB) sda: assuming Write Enabled sda: assuming drive cache: write through sda: unknown partition table Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 PCI: Setting latency timer of device 0000:00:1d.3 to 64 hub 1-0:1.0: port 2 not reset yet, waiting 50ms uhci_hcd 0000:00:1d.3: irq 169, io base 0000e200 uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: detected 2 ports usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: default language 0x0409 usb usb5: Product: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 usb usb5: Manufacturer: Linux 2.6.7-ck2 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb usb5: hotplug usb usb5: adding 5-0:1.0 (config #1, interface 0) usb 5-0:1.0: hotplug hub 5-0:1.0: usb_probe_interface hub 5-0:1.0: usb_probe_interface - got id hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected hub 5-0:1.0: standalone hub hub 5-0:1.0: no power switching (usb 1.0) hub 5-0:1.0: individual port over-current protection hub 5-0:1.0: power on to power good time: 2ms hub 5-0:1.0: local power source is good ehci_hcd 0000:00:1d.7: port 2 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 3: delay 100ms stable 4 status 0x501 hub 1-0:1.0: port 3 not reset yet, waiting 50ms ehci_hcd 0000:00:1d.7: port 3 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT uhci_hcd 0000:00:1d.0: port 2 portsc 0093 hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s EXT3 FS on hda5, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com hub 2-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x101 usb 2-2: new full speed USB device using address 2 usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: default language 0x0409 usb 2-2: Product: USB-Serial Controller usb 2-2: Manufacturer: Prolific Technology Inc. usb 2-2: hotplug usb 2-2: adding 2-2:1.0 (config #1, interface 0) usb 2-2:1.0: hotplug uhci_hcd 0000:00:1d.1: port 1 portsc 0093 hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic usbserial 2-2:1.0: usb_probe_interface usbserial 2-2:1.0: usb_probe_interface - got id usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 drivers/usb/serial/usb-serial.c: USB Serial support registered for PL-2303 pl2303 2-2:1.0: usb_probe_interface pl2303 2-2:1.0: usb_probe_interface - got id pl2303 2-2:1.0: PL-2303 converter detected usb 2-2: PL-2303 converter now attached to ttyUSB0 (or usb/tts/0 for devfs) usbcore: registered new driver pl2303 drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.10 hub 3-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101 usb 3-1: new full speed USB device using address 2 usb 3-1: new device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-1: hotplug usb 3-1: adding 3-1:1.0 (config #1, interface 0) usb 3-1:1.0: hotplug hub 3-1:1.0: usb_probe_interface hub 3-1:1.0: usb_probe_interface - got id hub 3-1:1.0: USB hub found hub 3-1:1.0: 2 ports detected hub 3-1:1.0: standalone hub hub 3-1:1.0: individual port power switching hub 3-1:1.0: individual port over-current protection hub 3-1:1.0: power on to power good time: 100ms hub 3-1:1.0: hub controller current requirement: 100mA hub 3-1:1.0: 400mA bus power budget for children hub 3-1:1.0: enabling power on all ports ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC hub 1-0:1.0: port 2, status 0000, change 0001, 12 Mb/s ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC hub 1-0:1.0: port 3, status 0000, change 0001, 12 Mb/s uhci_hcd 0000:00:1d.2: suspend_hc uhci_hcd 0000:00:1d.3: suspend_hc Unable to load NLS charset iso8859-1 Unable to load NLS charset iso8859-1 kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: hda7: found reiserfs format "3.6" with standard journal ReiserFS: hda7: using ordered data mode ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda7: checking transaction log (hda7) ReiserFS: hda7: Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. SGI XFS with ACLs, security attributes, realtime, no debug enabled XFS mounting filesystem hdb2 Ending clean XFS mount for filesystem: hdb2 NTFS driver 2.1.14 [Flags: R/O MODULE]. NTFS-fs warning (device hda1): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future. NTFS volume version 3.0. NTFS-fs warning (device hda2): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future. NTFS volume version 3.0. NTFS-fs warning (device hdd2): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future. NTFS volume version 3.0. Supermount version 2.0.4 for kernel 2.6 Adding 516088k swap on /mnt/swap/x/pagefile.sys. Priority:-1 extents:1 Adding 516088k swap on /mnt/swap/y/pagefile.sys. Priority:-2 extents:2 parport0: PC-style at 0x378 [PCSPP(,...)] inserting floppy driver for 2.6.7-ck2 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 8139too Fast Ethernet driver 0.9.27 eth0: RealTek RTL8139 at 0xd000, 00:04:61:6d:e6:65, IRQ 225 eth0: Identified 8139 chip type 'RTL-8100B/8139D' 8139too Fast Ethernet driver 0.9.27 eth0: RealTek RTL8139 at 0xd000, 00:04:61:6d:e6:65, IRQ 225 eth0: Identified 8139 chip type 'RTL-8100B/8139D' apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. parport0: PC-style at 0x378 [PCSPP(,...)] lp0: using parport0 (polling).

Поясняю подробнее: Все устроства _ЕСТЬ_, отрываются, и в них посылается какая-то команда (kppp, minicom, pppd, ...). Но ответ _НЕ_ _ВОЗВРАЩАЕТСЯ_ с этого устройства никогда. тот же /dev/null, только если шнурок отключить, то уже тогда это устройство пропадает (no such device). Где грабли ?

Абсолютно ничего не говорит о том, как решать проблему: modprobe pl2303 : <пусто> modprobe usbserial : <пусто> и потом вся поддержка может быть builtin в ядре, а не ввиде модулей. Module Size Used by ppp_generic 22036 0 slhc 6528 1 ppp_generic snd_intel8x0 30216 4 snd_ac97_codec 65284 1 snd_intel8x0 snd_mpu401_uart 6656 1 snd_intel8x0 snd_rawmidi 21028 1 snd_mpu401_uart parport_pc 19520 1 lp 8072 0 parport 21952 2 parport_pc,lp autofs4 17412 1 sunrpc 134244 1 8139too 20992 0 floppy 52976 0 supermount 35984 2 nls_utf8 1920 4 ntfs 84940 3 xfs 554012 1 vfat 12544 3 fat 39968 1 vfat pl2303 14852 0 usbserial 24172 1 pl2303 dm_mod 37664 0 sd_mod 16640 0 usb_storage 26880 0 uhci_hcd 29452 0 ehci_hcd 38404 0 rtc 11592 0

Ситуация такая: есть GPRS модем в Siemense S55, который надо соеденить ч/з usb шнурок c компом Проблема: когда втыкаю этот шнурок, драйвер pl2303 не подхватывается, и, как следствие любой порт usb-serial (/dev/ttyUSB{X}, /dev/usb/tty{X} и др.) виден, но ничего не возвращает, хотя байты туда уходят (как /dev/null). В ядре вся поддержка включена. Где может быть косяк ?

что до, что после lsmod выдаёт одно и тоже: Module Size Used by snd_intel8x0 30216 4 snd_ac97_codec 65284 1 snd_intel8x0 snd_mpu401_uart 6656 1 snd_intel8x0 snd_rawmidi 21028 1 snd_mpu401_uart parport_pc 19520 1 lp 8072 0 parport 21952 2 parport_pc,lp autofs4 17412 1 sunrpc 134244 1 8139too 20992 0 floppy 52976 0 supermount 35984 2 nls_utf8 1920 4 ntfs 84940 3 xfs 554012 1 vfat 12544 3 fat 39968 1 vfat dm_mod 37664 0 uhci_hcd 28944 0 ehci_hcd 26244 0 rtc 11592 0 У меня поддержка usbserial прямо в ядро включена, а не в модули

Прошу не пинать, если такая тема уже была здесь, но мне не попалось решение в поиске. У меня GPRS модем в Siemense S55 ч/з USB датакабель, и так похоже, что модем не отзывается ни на одну команду. Соответствующие драйвера usbserial и поддержка PPP включены в ядре, девайс /dev/ttyUSB0 или /dev/usb/ttyUSB0 тоже открывается, команды туда уходят, но возвращаются только пустые строки. Как можно правильно сконфигурить модем?

Сканирую со своей машыны : свой IP : [root@localhost root]# nmap -sU -vv 192.168.0.1 Starting nmap 3.50 ( http://www.insecure.org/nmap/ ) at 2005-04-26 11:45 UTC Host 192.168.0.1 appears to be up ... good. Initiating UDP Scan against 192.168.0.1 at 11:45 The UDP Scan took 5 seconds to scan 1478 ports. Adding open port 2049/udp Adding open port 864/udp Adding open port 911/udp Adding open port 111/udp Adding open port 32770/udp Adding open port 32768/udp Adding open port 846/udp Interesting ports on 192.168.0.1: (The 1471 ports scanned but not shown below are in state: closed) PORT STATE SERVICE 111/udp open rpcbind 846/udp open unknown 864/udp open unknown 911/udp open unknown 2049/udp open nfs 32768/udp open omad 32770/udp open sometimes-rpc4 Nmap run completed -- 1 IP address (1 host up) scanned in 5.074 seconds целевую машыну : [root@localhost root]# nmap -sU -vv 192.168.0.2 Starting nmap 3.50 ( http://www.insecure.org/nmap/ ) at 2005-04-26 11:32 UTC Host 192.168.0.2 appears to be up ... good. Initiating UDP Scan against 192.168.0.2 at 11:32 Too many drops ... increasing senddelay to 50000 Too many drops ... increasing senddelay to 100000 Too many drops ... increasing senddelay to 200000 Too many drops ... increasing senddelay to 400000 Too many drops ... increasing senddelay to 800000 # тут всё зависает на неопределённое время, обламываю caught SIGINT signal, cleaning up Сейчас убрал одно правило в фаерволе - стало: со своей машины ч/з интерфейс 192.168.0.1 шара монтируется ОК, с соседской FreeBSD (192.168.0.3 )- тоже OK, с целевой машины (192.168.0.2): [root@SM01 /root]$mount -t nfs 192.168.0.1:/nfsshare /mnt/nfs nfs warning: mount version older than kernel lockd_up: no pid, 2 users?? RPC: sendmsg returned error 101 portmap: RPC call returned error 101 RPC: sendmsg returned error 101 portmap: RPC call returned error 101 RPC: sendmsg returned error 101 portmap: RPC call returned error 101 [root@SM01 /root]$ В чём ещё могут быть проблемы ?

Вот тут-то турбо-задница. На той стороне нет ничего, кроме ls, mount, df, ping, и терминалка на последовательном порту, а единственный способ чё-нить туда закинуть- примонитировать экспортированную NFS. Ещё рекомендации ?

вроде как открыт: [root@localhost RPMS]# nmap -sU localhost Starting nmap 3.50 ( http://www.insecure.org/nmap/ ) at 2005-04-25 15:38 UTC Interesting ports on localhost (127.0.0.1): (The 1471 ports scanned but not shown below are in state: closed) PORT STATE SERVICE 111/udp open rpcbind 666/udp open doom 684/udp open unknown 914/udp open unknown 2049/udp open nfs 32768/udp open omad 32771/udp open sometimes-rpc6 Nmap run completed -- 1 IP address (1 host up) scanned in 5.048 seconds

Такая ситуация: надо получить доступ к файловой системе компа ч/з NFS. на компе, экспортирующем свою шару через NFS такие настройки в /etc/exports : /nfsshare 192.168.0.2(rw) localhost(rw) 192.168.0.3(ro,insecure) с самого себя экспортируемый каталог монтируется (mount -t nfs localhost:/nfsshare /mnt/net - OK), а с другого адреса если пытаюсь смонтировать, то получаю : mount -t nfs 192.168.0.1:/nfsshare /mnt/nfs mount: RPC: Port mapper failure - RPC: unable to receive В чём тут дело ?