Вот распечатка dmesg, может кто знает в чем проблема?
Linux version 2.4.2-2 (root@porky.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-79)) #1 Sun Apr 8 20:41:30 EDT 2001
BIOS-provided physical RAM map:
BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable)
BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved)
BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved)
BIOS-e820: 0000000003ee0000 @ 0000000000100000 (usable)
BIOS-e820: 0000000000010000 @ 0000000003fe0000 (ACPI data)
BIOS-e820: 0000000000010000 @ 0000000003ff0000 (reserved)
BIOS-e820: 0000000000016e00 @ 00000000100a0000 (reserved)
BIOS-e820: 0000000000000200 @ 00000000100b6e00 (ACPI NVS)
BIOS-e820: 0000000000049000 @ 00000000100b7000 (reserved)
BIOS-e820: 0000000000080000 @ 00000000fff80000 (reserved)
On node 0 totalpages: 16352
zone(0): 4096 pages.
zone DMA has max 32 cached pages.
zone(1): 12256 pages.
zone Normal has max 95 cached pages.
zone(2): 0 pages.
zone HighMem has max 1 cached pages.
Kernel command line: auto BOOT_IMAGE=RedHat ro root=305 BOOT_FILE=/boot/vmlinuz-2.4.2-2
Initializing CPU#0
Detected 597.074 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1192.75 BogoMIPS
Memory: 61908k/65408k available (1365k kernel code, 3112k reserved, 92k data, 236k init, 0k highmem)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
VFS: Diskquotas version dquot_6.5.0 initialized
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xff85c, last bus=21
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/7110] at 00:05.0
PCI: Found IRQ 11 for device 00:0b.0
PCI: The same IRQ used for device 01:00.0
PCI: Found IRQ 11 for device 00:0b.1
PCI: The same IRQ used for device 00:0c.0
got res[10000000:10000fff] for resource 0 of Toshiba America Info Systems ToPIC95 PCI to Cardbus Bridge with ZV Support
got res[10001000:10001fff] for resource 0 of Toshiba America Info Systems ToPIC95 PCI to Cardbus Bridge with ZV Support (#2)
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14)
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
block: queued sectors max/low 41021kB/13673kB, 128 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 29
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK6015MAP, ATA DISK drive
hdc: DV-28E-0, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 11733120 sectors (6007 MB), CHS=730/255/63, UDMA(33)
Partition check:
hda: hda1 hda2 < hda5 hda6 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Serial driver version 5.02 (2000-08-09) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10d
md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md.c: sizeof(mdp_super_t) = 4096
autodetecting RAID arrays
autorun ...
... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 236k freed
Adding Swap: 200772k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.251 $ time 20:53:29 Apr 8 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:05.2
usb-uhci.c: USB UHCI at I/O 0xff80, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0xea0/0x2168) is not claimed by any active driver.
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: Generic Model: USB Flash Disk Rev: 2.00
Type: Direct-Access ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
SMSC chip at EFER=0x3f0 key=0x55 devid=29 devrev=00
SMSC unknown chip type
0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 8
0x378: readIntrThreshold is 8
0x378: PWord is 8 bits
0x378: Interrupts are ISA-Pulses
0x378: ECP port cfgA=0x10 cfgB=0x4b
0x378: ECP settings irq=7 dma=3
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
ip_conntrack (511 buckets, 4088 max)
Linux PCMCIA Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 00:0b.0
PCI: The same IRQ used for device 01:00.0
PCI: Found IRQ 11 for device 00:0b.1
PCI: The same IRQ used for device 00:0c.0
Yenta IRQ list 04b8, PCI irq11
Socket status: 30000001
Yenta IRQ list 04b8, PCI irq11
Socket status: 30000007
cs: cb_alloc(bus 20): vendor 0x1186, device 0x1340
got res[1000:10ff] for resource 0 of PCI device 1186:1340
got res[10800000:108001ff] for resource 1 of PCI device 1186:1340
PCI: Enabling device 14:00.0 (0000 -> 0003)
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
maestro: version 0.14 time 20:53:13 Apr 8 2001
PCI: Found IRQ 11 for device 00:0c.0
PCI: The same IRQ used for device 00:0b.1
maestro: Configuring ESS Maestro 2E found at IO 0xFC00 IRQ 11
maestro: subvendor id: 0x00011179
maestro: not attempting power management.
maestro: AC97 Codec detected: v: 0x83847609 caps: 0x6940 pwr: 0xf
maestro: 1 channels configured.