Проблема решена. Теперь другой вопрос:
Кто может по логам хотя бы намекнуть в чём проблема?
Jun 7 14:02:10 Serg pppoe-server[3314]: Session 1 created for client 00:50:56:c0:00:01 (10.67.15.1) on eth0 using Service-Name ''
Jun 7 14:02:10 Serg pppd[3314]: pppd 2.4.1 started by root, uid 0
Jun 7 14:02:10 Serg pppd[3314]: Using interface ppp0
Jun 7 14:02:10 Serg pppd[3314]: Connect: ppp0 <--> /dev/pts/2
Jun 7 14:02:10 Serg /etc/hotplug/net.agent: assuming ppp0 is already up
Jun 7 14:02:10 Serg ppp(pam_unix)[3314]: check pass; user unknown
Jun 7 14:02:10 Serg ppp(pam_unix)[3314]: authentication failure; logname= uid=0 euid=0 tty= ruser= rhost=
Jun 7 14:02:13 Serg pppd[3314]: PAP login failure for admin
Jun 7 14:02:13 Serg pppoe-server[3313]: Sent PADT
Jun 7 14:02:13 Serg pppd[3314]: Terminating on signal 15.
Jun 7 14:02:13 Serg pppd[3314]: Connection terminated.
Jun 7 14:02:13 Serg pppoe[3315]: read (asyncReadFromPPP): Session 1: Input/output error
Jun 7 14:02:13 Serg pppd[3314]: Exit.
Jun 7 14:02:13 Serg pppoe-server[3313]: Session 1 closed for client 00:50:56:c0:00:01 (10.67.15.1) on eth0
Jun 7 14:02:13 Serg /etc/hotplug/net.agent: NET unregister event not supported
Что делал:
1. Настроил интерфейс eth0 (Windows машина и Linux машина(VMWare) пингуются).
2. Установил пакет rp-pppoe.
3. Создал файл etc/ppp/pppoe-server
# PPP options for the PPPoE server
# LIC: GPL
lock
local
require-chap
default-mru
default-asyncmap
proxyarp
ktune
login
lcp-echo-interval 20
lcp-echo-failure 2
### НИЖЕ ВМЕСТО xxx.xxx.xxx.xxx
### УКАЖИТЕ DNS СЕРВЕР ВАШЕГО ПРОВАЙДЕРА.
### Если Вы хоть раз соединялись со своим провайдером,
### то его DNS сервер можно узнать из файла /etc/resolv.conf
ms-dns 192.168.1.20
nobsdcomp
noccp
noendpoint
noipdefault
noipx
novj
receive-all
4. Отредактировал файл etc/bin/chap-secrets
# Secrets for authentication using CHAP
# client server secret IP addresses
####### redhat-config-network will overwrite this part!!! (begin) ##########
####### redhat-config-network will overwrite this part!!! (end) ############
"admin" * "admin" 192.168.184.2
где 192.168.184.2 адрес, который будет выдаваться юзеру зашедшему под логином admin и паролем admin
5. Запустил pppoe-server командой
/usr/sbin/pppoe-server -I eth0 -L 192.168.184.128
где 192.168.184.128 адрес интерфейса eth0
6. Создал на Windows-машине PPPoE подключение и попытался соединиться. После чего и получил вышеприведённые сообщения из файла messages