Помогите разобратсья с видеокартой

[Axxent]

Запарился уже... Пытаюсь врубить аппаратное ускорение на своем мандрейке 10.0 (видео Sapphire Radeon 9800 Pro 128 MB AGP), полдня сегодня просидел и ни черта не добился. Скачал: дрова, новые. fglrx. Поставил. Точно так как написано на сайте ATI. После этого по их же рекомендации запустил fglrxinfo, который выдал следующее:

Loading required GL library /usr/lib/libGL.so.1

Xlib: extension "XFree86-DRI" missing on display ":0.0".

display: :0.0 screen: 0

OpenGL vendor string: Mesa project: www.mesa3d.org

OpenGL renderer string: Mesa GLX Indirect

OpenGL version string: 1.3 Mesa 4.0.4

Вот. Вообще индикатором того, что дрова правильно встали и верно сконфигурированы, является строчка "OpenGL vendor string: ATI Technologies Inc." Пробовал деинсталить месу, ноль реакции.

Конфигуратор дописал кучу байды в XFree86Config-4, а именно следующее:

# === ATI device section ===

Section "Device"

Identifier "ATI Graphics Adapter"

Driver "ati"

Screen 0

BusID "PCI:3:0:0" # vendor=1002, device=4e48

Option "FSAAMSPosY1" "0.000000"

Option "StereoSyncEnable" "1"

# ChipSet "ati"

# ### generic DRI settings ###

# === disable PnP Monitor ===

#Option "NoDDC"

Option "FSAAMSPosX5" "0.000000"

Option "FSAAMSPosY4" "0.000000"

Option "FSAAMSPosX2" "0.000000"

# === Pseudo Color Visuals (8-bit visuals) ===

Option "PseudoColorVisuals" "off"

Option "FSAAMSPosX4" "0.000000"

Option "FSAAMSPosY0" "0.000000"

Option "FSAADisableGamma" "no"

# === Video Overlay for the Xv extension ===

Option "VideoOverlay" "on"

Option "ForceGenericCPU" "no"

Option "GammaCorrectionII" "0x00000000"

# === misc DRI settings ===

Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr

Option "VRefresh2" "unspecified"

Option "FSAAMSPosY5" "0.000000"

# === Center Mode (Laptops only) ===

Option "CenterMode" "off"

Option "IgnoreEDID" "off"

# === OpenGL Overlay ===

# Note: When OpenGL Overlay is enabled, Video Overlay

# will be disabled automatically

Option "OpenGLOverlay" "off"

Option "FSAACustomizeMSPos" "no"

Option "FSAAScale" "1"

# ### FireGL DDX driver module specific settings ###

# === Screen Management ===

Option "DesktopSetup" "0x00000000"

Option "HSync2" "unspecified"

Option "TVHStartAdj" "0"

# === FSAA Management ===

Option "FSAAEnable" "no"

Option "FSAAMSPosX0" "0.000000"

Option "no_dri" "no"

Option "GammaCorrectionI" "0x00000000"

Option "UseInternalAGPGART" "yes"

Option "BlockSignalsOnLock" "on"

Option "FSAAMSPosX1" "0.000000"

Option "MonitorLayout" "AUTO, AUTO"

# === Misc Options ===

Option "UseFastTLS" "0"

# === disable/enable XAA/DRI ===

Option "no_accel" "no"

Option "FSAAMSPosY3" "0.000000"

# === OpenGL specific profiles/settings ===

Option "Capabilities" "0x00008000"

Option "TVStandard" "NTSC-M"

Option "TVVPosAdj" "0"

Option "TVColorAdj" "0"

Option "FSAAMSPosY2" "0.000000"

# === TV-out Management ===

Option "NoTV" "yes"

Option "TVHPosAdj" "0"

Option "TVHSizeAdj" "0"

Option "ScreenOverlap" "0"

# === QBS Management ===

Option "Stereo" "off"

Option "FSAAMSPosX3" "0.000000"

Option "TVVSizeAdj" "0"

EndSection

# ************************************************************ **********

# Screen sections

# ************************************************************ **********

# Any number of screen sections may be present. Each describes

# the configuration of a single screen. A single specific screen section

# may be specified from the X server command line with the "-screen"

# option.

Section "Screen"

Identifier "Screen0"

Device "ATI Graphics Adapter"

Monitor "Monitor0"

#Option "backingstore"

Subsection "Display"

Depth 24

Modes "1280x1024" "1024x768" "800x600"

ViewPort 0 0 # initial origin if mode is smaller than desktop

Option "XFree86-DRI" "on"

# Virtual 1280 1024

EndSubsection

DefaultDepth 24

EndSection

# ************************************************************ **********

# ServerLayout sections.

# ************************************************************ **********

# Any number of ServerLayout sections may be present. Each describes

# the way multiple screens are organised. A specific ServerLayout

# section may be specified from the X server command line with the

# "-layout" option. In the absence of this, the first section is used.

# When now ServerLayout section is present, the first Screen section

# is used alone.

Section "ServerLayout"

# The Identifier line must be present

Identifier "Server Layout"

# Each InputDevice line specifies an InputDevice section name and

# optionally some options to specify the way the device is to be

# used. Those options include "CorePointer", "CoreKeyboard" and

# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"

InputDevice "Keyboard1" "CoreKeyboard"

# Each Screen line specifies a Screen section name, and optionally

# the relative position of other screens. The four names after

# primary screen name are the screens to the top, bottom, left and right

# of the primary screen.

Screen "Screen0"

EndSection

У меня подозрения как раз на нем - может подскажет кто-нибудь, в чем может быть дело?

[fitter]

А что выводит в лог Xorg или XFree, смотря что там?