USB Flash Прощу вас, помогите!

[Xer[null]x]

Господа, видимо эта тема неоднократно поднималась и большинство из них я прочитал, НО:

Все происходит по самому лучшему варианту, пока я не ввожу конечную команду

mount /dev/sdaX /mnt/usb

После чего индикатор Флэшки превращается в лампочку постоянного горения (никаких миганий) и система примерно через 30 сек. зависает окончательно и неизлечимо.

В логе messages это время просто пропущено (16:04 - 16:12, в 16:10 - зависание).

[Sleeping Daemon]

Xer[null

x писал(а) сб, 08 октября 2005 17:49]Господа, видимо эта тема неоднократно поднималась и большинство из них я прочитал, НО: Все происходит по самому лучшему варианту, пока я не ввожу конечную команду mount /dev/sdaX /mnt/usb После чего индикатор Флэшки превращается в лампочку постоянного горения (никаких миганий) и система примерно через 30 сек. зависает окончательно и неизлечимо. В логе messages это время просто пропущено (16:04 - 16:12, в 16:10 - зависание).

Версия оси какая?

[Xer[null]x]

RedHat 7.1 (kernel 2.4)

Поставил 9, теперь пишет

mount: wrong fs type,b bad option, bad superblock on /dev/sda2, or too many mounted file systems

Заново поставлю 7.1, потому как на 9 ооочень сильно тормозит ноут. Понял, что баг не связан с версией ядра.

[Xer[null]x]

Вот распечатка dmesg, может кто знает в чем проблема?

Linux version 2.4.2-2 (root@porky.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-79)) #1 Sun Apr 8 20:41:30 EDT 2001

BIOS-provided physical RAM map:

BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable)

BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved)

BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved)

BIOS-e820: 0000000003ee0000 @ 0000000000100000 (usable)

BIOS-e820: 0000000000010000 @ 0000000003fe0000 (ACPI data)

BIOS-e820: 0000000000010000 @ 0000000003ff0000 (reserved)

BIOS-e820: 0000000000016e00 @ 00000000100a0000 (reserved)

BIOS-e820: 0000000000000200 @ 00000000100b6e00 (ACPI NVS)

BIOS-e820: 0000000000049000 @ 00000000100b7000 (reserved)

BIOS-e820: 0000000000080000 @ 00000000fff80000 (reserved)

On node 0 totalpages: 16352

zone(0): 4096 pages.

zone DMA has max 32 cached pages.

zone(1): 12256 pages.

zone Normal has max 95 cached pages.

zone(2): 0 pages.

zone HighMem has max 1 cached pages.

Kernel command line: auto BOOT_IMAGE=RedHat ro root=305 BOOT_FILE=/boot/vmlinuz-2.4.2-2

Initializing CPU#0

Detected 597.074 MHz processor.

Console: colour VGA+ 80x25

Calibrating delay loop... 1192.75 BogoMIPS

Memory: 61908k/65408k available (1365k kernel code, 3112k reserved, 92k data, 236k init, 0k highmem)

Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)

Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 16384 (order: 5, 131072 bytes)

Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)

VFS: Diskquotas version dquot_6.5.0 initialized

CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0

CPU: L1 I cache: 16K, L1 D cache: 16K

CPU: L2 cache: 256K

Intel machine check architecture supported.

Intel machine check reporting enabled on CPU#0.

CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000

CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000

CPU: Common caps: 0383f9ff 00000000 00000000 00000000

CPU: Intel Pentium III (Coppermine) stepping 03

Enabling fast FPU save and restore... done.

Enabling unmasked SIMD FPU exception support... done.

Checking 'hlt' instruction... OK.

POSIX conformance testing by UNIFIX

mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au)

mtrr: detected mtrr type: Intel

PCI: PCI BIOS revision 2.10 entry at 0xff85c, last bus=21

PCI: Using configuration type 1

PCI: Probing PCI hardware

Unknown bridge resource 0: assuming transparent

Unknown bridge resource 2: assuming transparent

PCI: Using IRQ router PIIX [8086/7110] at 00:05.0

PCI: Found IRQ 11 for device 00:0b.0

PCI: The same IRQ used for device 01:00.0

PCI: Found IRQ 11 for device 00:0b.1

PCI: The same IRQ used for device 00:0c.0

got res[10000000:10000fff] for resource 0 of Toshiba America Info Systems ToPIC95 PCI to Cardbus Bridge with ZV Support

got res[10001000:10001fff] for resource 0 of Toshiba America Info Systems ToPIC95 PCI to Cardbus Bridge with ZV Support (#2)

Limiting direct PCI/PCI transfers.

isapnp: Scanning for PnP cards...

isapnp: No Plug & Play device found

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14)

Starting kswapd v1.8

pty: 256 Unix98 ptys configured

block: queued sectors max/low 41021kB/13673kB, 128 slots per queue

RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize

Uniform Multi-Platform E-IDE driver Revision: 6.31

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

PIIX4: IDE controller on PCI bus 00 dev 29

PIIX4: chipset revision 1

PIIX4: not 100% native mode: will probe irqs later

ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:pio

ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:DMA, hdd:pio

hda: TOSHIBA MK6015MAP, ATA DISK drive

hdc: DV-28E-0, ATAPI CD/DVD-ROM drive

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

ide1 at 0x170-0x177,0x376 on irq 15

hda: 11733120 sectors (6007 MB), CHS=730/255/63, UDMA(33)

Partition check:

hda: hda1 hda2 < hda5 hda6 >

Floppy drive(s): fd0 is 1.44M

FDC 0 is a post-1991 82077

Serial driver version 5.02 (2000-08-09) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled

ttyS00 at 0x03f8 (irq = 4) is a 16550A

Real Time Clock Driver v1.10d

md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27

md.c: sizeof(mdp_super_t) = 4096

autodetecting RAID arrays

autorun ...

... autorun DONE.

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 4096 bind 4096)

Linux IP multicast router 0.06 plus PIM-SM

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (ext2 filesystem) readonly.

Freeing unused kernel memory: 236k freed

Adding Swap: 200772k swap-space (priority -1)

usb.c: registered new driver usbdevfs

usb.c: registered new driver hub

usb-uhci.c: $Revision: 1.251 $ time 20:53:29 Apr 8 2001

usb-uhci.c: High bandwidth mode enabled

PCI: Found IRQ 11 for device 00:05.2

usb-uhci.c: USB UHCI at I/O 0xff80, IRQ 11

usb-uhci.c: Detected 2 ports

usb.c: new USB bus registered, assigned bus number 1

hub.c: USB hub found

hub.c: 2 ports detected

hub.c: USB new device connect on bus1/1, assigned device number 2

usb.c: USB device 2 (vend/prod 0xea0/0x2168) is not claimed by any active driver.

SCSI subsystem driver Revision: 1.00

Initializing USB Mass Storage driver...

usb.c: registered new driver usb-storage

scsi0 : SCSI emulation for USB Mass Storage devices

Vendor: Generic Model: USB Flash Disk Rev: 2.00

Type: Direct-Access ANSI SCSI revision: 02

WARNING: USB Mass Storage data integrity not assured

USB Mass Storage device found at 2

USB Mass Storage support registered.

Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...

SMSC Super-IO detection, now testing Ports 2F0, 370 ...

SMSC chip at EFER=0x3f0 key=0x55 devid=29 devrev=00

SMSC unknown chip type

0x378: FIFO is 16 bytes

0x378: writeIntrThreshold is 8

0x378: readIntrThreshold is 8

0x378: PWord is 8 bits

0x378: Interrupts are ISA-Pulses

0x378: ECP port cfgA=0x10 cfgB=0x4b

0x378: ECP settings irq=7 dma=3

parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP]

parport0: irq 7 detected

parport0: cpp_daisy: aa5500ff(38)

parport0: assign_addrs: aa5500ff(38)

parport0: cpp_daisy: aa5500ff(38)

parport0: assign_addrs: aa5500ff(38)

ip_conntrack (511 buckets, 4088 max)

Linux PCMCIA Card Services 3.1.22

options: [pci] [cardbus] [pm]

PCI: Found IRQ 11 for device 00:0b.0

PCI: The same IRQ used for device 01:00.0

PCI: Found IRQ 11 for device 00:0b.1

PCI: The same IRQ used for device 00:0c.0

Yenta IRQ list 04b8, PCI irq11

Socket status: 30000001

Yenta IRQ list 04b8, PCI irq11

Socket status: 30000007

cs: cb_alloc(bus 20): vendor 0x1186, device 0x1340

got res[1000:10ff] for resource 0 of PCI device 1186:1340

got res[10800000:108001ff] for resource 1 of PCI device 1186:1340

PCI: Enabling device 14:00.0 (0000 -> 0003)

cs: IO port probe 0x0c00-0x0cff: clean.

cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7

cs: IO port probe 0x0a00-0x0aff: clean.

maestro: version 0.14 time 20:53:13 Apr 8 2001

PCI: Found IRQ 11 for device 00:0c.0

PCI: The same IRQ used for device 00:0b.1

maestro: Configuring ESS Maestro 2E found at IO 0xFC00 IRQ 11

maestro: subvendor id: 0x00011179

maestro: not attempting power management.

maestro: AC97 Codec detected: v: 0x83847609 caps: 0x6940 pwr: 0xf

maestro: 1 channels configured.