Настройка D-Link DSL-200, WebPlus

[Art-spb]

Имеется: D-Link DSL-200 ver.B1, Mandriva 2006 (kernel 2.6.12), фиксированый IP от WebPlus. Специально для этого модема и провайдера есть руководство, которому я и следовал, но эффекта не достигнул. После выполнения всех настроек модем соединяется с сетью на низшем уровне, но коннект не появляется (если пинговать, то появляется сообщение: Network is unreachable). На последнем этапе подключения появляется надпись:

[EciAdsl 5/5] Setting up route table...

Waiting for tap0...

Adding default route... default route added: tap0

Где в моих действиях может быть ошибка, и что можно предпринять для ее устранения?

# eciadsl-doctor

You are using linux kernel version 2.6.12-12mdk

Support for USB is OK

Preliminary USB device filesystem is OK

dabusb module is not loaded: OK

UHCI support is not needed

OHCI support is OK

/dev/ppp is OK

HDLC support is OK

HDLC support is OK (no bug)

Loading EZ-USB firmware...

Process skipped .. no more needed

Loading the GlobeSpan firmware...

OK eciadsl-synch: success

You are using pppd version 2.4.3 (untested)

You have an /etc/ppp/options file. Options in this file may conflict with

options from /etc/ppp/peers/adsl. We suggest to remove this file or make a

backup copy.

No existing PPP connection... trying to make one (please wait)

Couldn't get channel number: Input/output error

Script /usr/local/bin/eciadsl-pppoeci -vpi 1 -vci 32 -vendor 0x2001 -product 0x5100 -mode LLC_RFC1483_ROUTED_IP finished (pid 13963), status = 0x0

using channel 2

Using interface ppp0

Connect: ppp0 <--> /dev/pts/2

Script /usr/local/bin/eciadsl-pppoeci -vpi 1 -vci 32 -vendor 0x2001 -product 0x5100 -mode LLC_RFC1483_ROUTED_IP finished (pid 13994), status = 0x0

Modem hangup

Connection terminated.

using channel 3

Using interface ppp0

Connect: ppp0 <--> /dev/pts/3

Script /usr/local/bin/eciadsl-pppoeci -vpi 1 -vci 32 -vendor 0x2001 -product 0x5100 -mode LLC_RFC1483_ROUTED_IP finished (pid 14025), status = 0x0

Modem hangup

Connection terminated.

using channel 4

Using interface ppp0

Connect: ppp0 <--> /dev/pts/4

Modem hangup

Connection terminated.

Script /usr/local/bin/eciadsl-pppoeci -vpi 1 -vci 32 -vendor 0x2001 -product 0x5100 -mode LLC_RFC1483_ROUTED_IP finished (pid 14058), status = 0x0

using channel 5

Using interface ppp0

Connect: ppp0 <--> /dev/pts/5

Script /usr/local/bin/eciadsl-pppoeci -vpi 1 -vci 32 -vendor 0x2001 -product 0x5100 -mode LLC_RFC1483_ROUTED_IP finished (pid 14090), status = 0x0

Modem hangup

Connection terminated.

using channel 6

Using interface ppp0

Connect: ppp0 <--> /dev/pts/6

Script /usr/local/bin/eciadsl-pppoeci -vpi 1 -vci 32 -vendor 0x2001 -product 0x5100 -mode LLC_RFC1483_ROUTED_IP finished (pid 14123), status = 0x0

Modem hangup

Connection terminated.

using channel 7

Using interface ppp0

Connect: ppp0 <--> /dev/pts/7

Script /usr/local/bin/eciadsl-pppoeci -vpi 1 -vci 32 -vendor 0x2001 -product 0x5100 -mode LLC_RFC1483_ROUTED_IP finished (pid 14155), status = 0x0

Modem hangup

Connection terminated.

using channel 8

Using interface ppp0

Connect: ppp0 <--> /dev/pts/8

Modem hangup

Connection terminated.

Script /usr/local/bin/eciadsl-pppoeci -vpi 1 -vci 32 -vendor 0x2001 -product 0x5100 -mode LLC_RFC1483_ROUTED_IP finished (pid 14180), status = 0x0

using channel 9

Using interface ppp0

Connect: ppp0 <--> /dev/pts/9

Modem hangup

Connection terminated.

Script /usr/local/bin/eciadsl-pppoeci -vpi 1 -vci 32 -vendor 0x2001 -product 0x5100 -mode LLC_RFC1483_ROUTED_IP finished (pid 14212), status = 0x0

using channel 10

Using interface ppp0

Connect: ppp0 <--> /dev/pts/10

Modem hangup

Connection terminated.

Script /usr/local/bin/eciadsl-pppoeci -vpi 1 -vci 32 -vendor 0x2001 -product 0x5100 -mode LLC_RFC1483_ROUTED_IP finished (pid 14242), status = 0x0

PPP: very bad ... usermode driver just crashed

# ifconfig

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

inet6 addr: ::1/128 Scope:Host

UP LOOPBACK RUNNING MTU:16436 Metric:1

RX packets:35690 errors:0 dropped:0 overruns:0 frame:0

TX packets:35690 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:3995948 (3.8 MiB) TX bytes:3995948 (3.8 MiB)

# lsusb

Bus 003 Device 001: ID 0000:0000

Bus 002 Device 001: ID 0000:0000

Bus 001 Device 007: ID 2001:5100 D-Link Corp. [hex]

Bus 001 Device 001: ID 0000:0000

[Legalizer]

Поиск по форуму вам поможет. Обсуждалось на днях.