Перейти к содержанию

VarLam

Members
  • Постов

    4
  • Зарегистрирован

  • Посещение

    Никогда

Достижения VarLam

  1. Уф, совсем намудрил с этими драйверами. Решил начать всё заново и переустановил систему. Поставил пакеты необходимые для установки драйвера, обновил систему, установил драйвера заново. И вот что получил в результате: varlam@SERGEYCOMP:~$ fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: RADEON 9800 SE OpenGL version string: 2.0.6400 (8.35.5) varlam@SERGEYCOMP:~$ fgl_glxgears Using GLX_SGIX_pbuffer 2474 frames in 5.0 seconds = 494.800 FPS 2979 frames in 5.0 seconds = 595.800 FPS 2962 frames in 5.0 seconds = 592.400 FPS 2975 frames in 5.0 seconds = 595.000 FPS 2972 frames in 5.0 seconds = 594.400 FPS 2981 frames in 5.0 seconds = 596.200 FPS 2983 frames in 5.0 seconds = 596.600 FPS 2976 frames in 5.0 seconds = 595.200 FPS НО, после установки этого драйвера и при запуске Х-ов, разрешение 1600*1200. Естественно меняю разрешение и ставлю 1024*768. Пытаюсь перезапустить Х-ы, но они теперь незапускаются( это всё проделывал под рутом). Далее делаю ребут( у меня поставлен графический вход, и логин с паролем обычного пользователя я ввожу уже в графической оболочке), как ни странно но Х-ы запускаются и предлагается ввести логин,пароль обычного пользователя, что я и делаю( разрешение опять же 1600*1200). Вхожу под обычным пользователем, меняю разрешение на 1024*768, перезагружаюсь. Опять предлогается ввести пароль обычного пользователя при разрешении 1600*1200, вхожу, разрешение снова 1024*768. Вобшем не пойму в чём дело, так понял что после установки драйвера разрешения все сбились, Как это можно исправить? Установил Cedega и решил провести тесты, которые в ней прилогаются, выяснил что 3D у меня неробит. Вот файлы которые вы просили выложить: 1)xorg.conf # /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. # (Type "man /etc/X11/xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "ServerLayout" Identifier "Default Layout" Screen 0 "aticonfig-Screen[0]" 0 0 InputDevice "Generic Keyboard" InputDevice "Configured Mouse" EndSection Section "Files" # path to defoma fonts FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" Load "i2c" Load "bitmap" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc104" Option "XkbLayout" "us,ru" Option "XkbVariant" ",winkeys" Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" EndSection Section "Monitor" Identifier "DELL P780" Option "DPMS" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "ATI Technologies Inc R350 AH [Radeon 9800]" Driver "ati" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]" Driver "fglrx" EndSection Section "Screen" Identifier "Default Screen" Device "ATI Technologies Inc R350 AH [Radeon 9800]" Monitor "DELL P780" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[0]" Device "aticonfig-Device[0]" Monitor "aticonfig-Monitor[0]" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "DRI" Mode 0666 EndSection Команда lsmod: Module Size Used by fglrx 654044 11 button 6800 0 ac 5252 0 battery 9732 0 ipv6 213856 8 nls_utf8 2304 1 nls_cp866 5504 1 vfat 11648 1 fat 45980 1 vfat dm_snapshot 15644 0 dm_mirror 18000 0 dm_mod 48952 2 dm_snapshot,dm_mirror loop 14216 0 tsdev 7616 0 sd_mod 19088 0 snd_emu10k1_synth 6656 0 snd_emux_synth 29952 1 snd_emu10k1_synth snd_seq_virmidi 6528 1 snd_emux_synth snd_seq_midi_emul 6016 1 snd_emux_synth snd_seq_dummy 3972 0 snd_seq_oss 27648 0 snd_seq_midi 8352 0 snd_seq_midi_event 6784 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi snd_seq 42192 9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dum my,snd_seq_oss,snd_seq_midi,snd_seq_midi_event floppy 52004 0 serio_raw 6532 0 snd_via82xx 25368 0 snd_emu10k1 100544 1 snd_emu10k1_synth snd_mpu401 7528 0 snd_mpu401_uart 7552 2 snd_via82xx,snd_mpu401 psmouse 34568 0 analog 10528 0 rtc 11572 0 snd_rawmidi 22048 4 snd_seq_virmidi,snd_seq_midi,snd_emu10k1,snd_mpu401_uart snd_ac97_codec 82848 2 snd_via82xx,snd_emu10k1 snd_ac97_bus 2432 1 snd_ac97_codec snd_pcm_oss 38048 0 snd_mixer_oss 15232 1 snd_pcm_oss parport_pc 31524 0 parport 32200 1 parport_pc i2c_viapro 8340 0 snd_pcm 65928 4 snd_via82xx,snd_emu10k1,snd_ac97_codec,snd_pcm_oss snd_seq_device 7820 8 snd_emu10k1_synth,snd_emux_synth,snd_seq_dummy,snd_seq_oss,s nd_seq_midi,snd_seq,snd_emu10k1,snd_rawmidi snd_timer 19972 3 snd_seq,snd_emu10k1,snd_pcm snd_page_alloc 9736 3 snd_via82xx,snd_emu10k1,snd_pcm snd_util_mem 4736 2 snd_emux_synth,snd_emu10k1 snd_hwdep 8836 2 snd_emux_synth,snd_emu10k1 snd 45412 16 snd_emux_synth,snd_seq_virmidi,snd_seq_oss,snd_seq,snd_via82 xx,snd_emu10k1,snd_mpu401,snd_mpu401_uart,snd_rawmidi,snd_ac 97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_device,sn d_timer,snd_hwdep i2c_core 19472 1 i2c_viapro pcspkr 2816 0 emu10k1_gp 3968 0 gameport 13832 4 snd_via82xx,analog,emu10k1_gp soundcore 8928 1 snd shpchp 32796 0 pci_hotplug 28088 1 shpchp via_agp 9728 1 agpgart 29360 2 fglrx,via_agp evdev 9088 1 ext3 116488 3 jbd 47272 1 ext3 usb_storage 71360 0 scsi_mod 121992 2 sd_mod,usb_storage 8139too 24192 0 ide_cd 35616 0 cdrom 32416 1 ide_cd ide_disk 14848 6 8139cp 20736 0 via_rhine 21768 0 mii 5376 3 8139too,8139cp,via_rhine ehci_hcd 27144 0 uhci_hcd 20236 0 usbcore 109444 4 usb_storage,ehci_hcd,uhci_hcd via82cxxx 8452 0 [permanent] generic 5508 0 [permanent] ide_core 107760 5 usb_storage,ide_cd,ide_disk,via82cxxx,generic thermal 13576 0 processor 23724 1 thermal fan 4868 0 Файл Xorg.0.log сделал как вложение
  2. SERGEYCOMP:~# fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Tungsten Graphics, Inc. OpenGL renderer string: Mesa DRI R300 20060815 AGP 1x TCL OpenGL version string: 1.2 (1.3 Mesa 6.5.1) ERGEYCOMP:~# fgl_glxgears Using GLX_SGIX_pbuffer X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 143 (GLX) Minor opcode of failed request: 5 (X_GLXMakeCurrent) Serial number of failed request: 35 Current serial number in output stream: 35 Как видим OpenGL неработает, присутсвие драйвера тоже не видно. Ставил драйвер так: SERGEYCOMP:~/Desktop# ./ati-driver-installer-8.35.5-x86.x86_64.run --buildpkg Debuian/etch сознано было 4 пакета:fglrx-amdcccle_8.35.5-1_i386.deb , fglrx-driver_8.35.5-1_i386.deb , fglrx-driver-dev_8.35.5-1_i386.deb , fglrx-kernel-src_8.35.5-1_i386.deb затем ставлю полученные пакеты: dpkg -i fglrx-................_i386.deb после этого: SERGEYCOMP:~/Desktop# module-assistant prepare,update SERGEYCOMP:~/Desktop# module-assistant build,install fglrx и затем уже делаю aticonfig кстати xorg.conf действительно изменяется, но как уже говорил выше больше неизменяется ничего Кстати почему aticonfig изменяет xorg.conf незадавая мне никаких вопросов? Насколько я знаю должен открываться диалог с пользователем.
  3. С английским у меня слабовато, т.к. учил только французский) Но как я понял он не может найти конфигурационный файл, предлагает использовать xorg.conf , который распологается /etc/X11/. Задача: после установки драйвера сконфигугрировать новый xorg.conf чтобы система работала с новым драйвером, т.к. родной драйвер меня неустраивает( драйвер Mesa). Редактировать в ручную xorg.conf я пока немогу, знания ещё непозволяют, именно поэтому пытаюсь применить aticonfig. Дистрибутив Debian/etch.
  4. VarLam

    aticonfig -неработает

    Всем доброго времени суток! У меня возникла небольшая проблема при установке драйвера ATI. В общем сам драйвер ставится нормально, без ошибок, но вот при запуске aticonfig --initial выдаётся следуюющее: SERGEYCOMP:~# aticonfig --initial Uninitialised file found, configuring. Using /etc/X11/xorg.conf Saved back-up to /etc/X11/xorg.conf.fglrx-0 Как с этим бороться? Я пробовал ставить различные версии драйвера, различными способами, эффект тот же, даже при установке из репозитария результат не меняется( не могу запустить aticonfig)
×
×
  • Создать...