eth2->eth0 "Переименовать"

[Fakir]

Собстно, после "удаления" лушней сетевой карточки из систенмого блока, стал подключаться через другую - eth2. Как мне сделать так, чтобы она была доступна по "адресу" eth0. Только не спрашивайте зачем мне это, долго объяснять

[Ineu]

Интерфейсы нумеруются согласно порядку их обнаружения ядром. Если Вы удалили eth0, то eth2 никак не может остаться таковой после перезагрузки. Так что будьте добры все-таки объяснить ситуацию

[Fakir]

[root@vp131147a denis]# ifconfig

eth1 Link encap:UNSPEC HWaddr 00-0F-EA-00-00-4E-B1-DD-00-00-00-00-00-00-00-00

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:6 dropped:6 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:0 (0.0 TX bytes:0 (0.0

eth2 Link encap:Ethernet HWaddr 00:0F:EA:4C:87:8F

inet addr:10.15.44.3 Bcast:10.15.44.255 Mask:255.255.255.0

inet6 addr: fe80::20f:eaff:fe4c:878f/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:3641 errors:0 dropped:0 overruns:0 frame:0

TX packets:2793 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:1001802 (978.3 KiB) TX bytes:470403 (459.3 KiB)

Interrupt:20 Memory:fb004000-0

eth3 Link encap:UNSPEC HWaddr 00-02-3C-01-01-00-0A-2D-00-00-00-00-00-00-00-00

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:6 dropped:6 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:0 (0.0 TX bytes:0 (0.0

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

inet6 addr: ::1/128 Scope:Host

UP LOOPBACK RUNNING MTU:16436 Metric:1

RX packets:18 errors:0 dropped:0 overruns:0 frame:0

TX packets:18 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:1088 (1.0 KiB) TX bytes:1088 (1.0 KiB)

ppp0 Link encap:Point-to-Point Protocol

inet addr:213.141.131.147 P-t-P:192.168.254.254 Mask:255.255.255.255

UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1368 Metric:1

RX packets:1637 errors:0 dropped:0 overruns:0 frame:0

TX packets:1801 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:3

RX bytes:706939 (690.3 KiB) TX bytes:300191 (293.1 KiB)

[root@vp131147a denis]#

ИМХО тут нет eth0...=(

[Ineu]

Fakir писал(а) Wed, 23 August 2006 17:20

[root@vp131147a denis]# ifconfig ИМХО тут нет eth0...=(

ifconfig -a

[Fakir]

[root@vp131147a denis]# ifconfig -a

eth1 Link encap:UNSPEC HWaddr 00-0F-EA-00-00-4E-B1-DD-00-00-00-00-00-00-00-00

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:6 dropped:6 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:0 (0.0 TX bytes:0 (0.0

eth2 Link encap:Ethernet HWaddr 00:0F:EA:4C:87:8F

inet addr:10.15.44.3 Bcast:10.15.44.255 Mask:255.255.255.0

inet6 addr: fe80::20f:eaff:fe4c:878f/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:22578 errors:0 dropped:0 overruns:0 frame:0

TX packets:18265 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:16870255 (16.0 MiB) TX bytes:2547720 (2.4 MiB)

Interrupt:20 Memory:fb004000-0

eth3 Link encap:UNSPEC HWaddr 00-02-3C-01-01-00-0A-2D-00-00-00-00-00-00-00-00

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:6 dropped:6 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:0 (0.0 TX bytes:0 (0.0

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

inet6 addr: ::1/128 Scope:Host

UP LOOPBACK RUNNING MTU:16436 Metric:1

RX packets:18 errors:0 dropped:0 overruns:0 frame:0

TX packets:18 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:1088 (1.0 KiB) TX bytes:1088 (1.0 KiB)

ppp0 Link encap:Point-to-Point Protocol

inet addr:213.141.131.147 P-t-P:192.168.254.254 Mask:255.255.255.255

UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1368 Metric:1

RX packets:15065 errors:0 dropped:0 overruns:0 frame:0

TX packets:12115 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:3

RX bytes:15240436 (14.5 MiB) TX bytes:1451777 (1.3 MiB)

sit0 Link encap:IPv6-in-IPv4

NOARP MTU:1480 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:0 (0.0 TX bytes:0 (0.0

[Ineu]

Ого... тогда дайте

ip l l

lspci

lsmod

dmesg | grep eth

[Fakir]

[root@vp131147a denis]# ip l l

1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue

link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

2: eth3: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000

link/ieee1394 00:02:3c:01:01:00:0a:2d brd ff:ff:ff:ff:ff:ff:ff:ff

3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000

link/ieee1394 00:0f:ea:00:00:4e:b1:dd brd ff:ff:ff:ff:ff:ff:ff:ff

4: eth2: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000

link/ether 00:0f:ea:4c:87:8f brd ff:ff:ff:ff:ff:ff

5: sit0: <NOARP> mtu 1480 qdisc noop

link/sit 0.0.0.0 brd 0.0.0.0

6: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP> mtu 1368 qdisc pfifo_fast qlen 3

link/ppp

[root@vp131147a denis]# lspci

00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)

00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02)

00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)

00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)

00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)

00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)

00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)

00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)

00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)

00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)

00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)

01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)

02:03.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)

02:03.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 04)

02:03.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)

02:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

02:09.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)

[root@vp131147a denis]# lsmod

Module Size Used by

ppp_async 10400 1

crc_ccitt 2624 1 ppp_async

sha1 3136 1

arc4 2464 1

ppp_mppe_mppc 16388 1

ppp_generic 27284 6 ppp_async,ppp_mppe_mppc

slhc 6976 1 ppp_generic

nvidia 4524948 20

i2c_core 18656 1 nvidia

raw 7648 1

md5 4576 1

ipv6 247936 12

rfcomm 37464 0

l2cap 24416 5 rfcomm

bluetooth 45220 4 rfcomm,l2cap

snd_emu10k1 119972 0

snd_rawmidi 21312 1 snd_emu10k1

snd_seq_device 7884 2 snd_emu10k1,snd_rawmidi

snd_util_mem 4256 1 snd_emu10k1

snd_hwdep 7936 1 snd_emu10k1

snd_pcm_oss 50368 0

snd_mixer_oss 17952 1 snd_pcm_oss

snd_intel8x0 30944 2

snd_ac97_codec 85180 2 snd_emu10k1,snd_intel8x0

snd_pcm 83812 5 snd_emu10k1,snd_pcm_oss,snd_intel8x0,snd_ac97_codec

snd_timer 22596 3 snd_emu10k1,snd_pcm

snd 48644 12 snd_emu10k1,snd_rawmidi,snd_seq_device,snd_hwdep,snd_pcm_oss ,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer

soundcore 8256 1 snd

snd_page_alloc 9384 3 snd_emu10k1,snd_intel8x0,snd_pcm

parport_pc 34020 1

lp 11080 0

parport 33864 2 parport_pc,lp

sk98lin 208600 1

af_packet 19272 2

floppy 57108 0

video 15076 0

thermal 11944 0

tc1100_wmi 6084 0

processor 19560 1 thermal

fan 4164 0

container 4000 0

button 5840 0

battery 8452 0

ac 4260 0

eth1394 18536 0

ide_cd 39172 0

ohci1394 34068 0

ieee1394 291832 2 eth1394,ohci1394

loop 16072 0

nls_koi8_u 5760 2

nls_cp866 5760 2

vfat 11840 2

fat 47676 1 vfat

intel_agp 21660 1

agpgart 30252 2 nvidia,intel_agp

hw_random 5364 0

tsdev 7008 0

joydev 9184 0

usbmouse 5184 0

xpad 10432 0

usbkbd 6848 0

evdev 8672 0

ext3 127784 2

jbd 54360 1 ext3

sd_mod 17280 0

ahci 9860 0

ata_piix 8132 0

libata 43268 2 ahci,ata_piix

scsi_mod 123560 3 sd_mod,ahci,libata

usbhid 46304 0

ehci_hcd 30856 0

uhci_hcd 30768 0

usbcore 111420 7 usbmouse,xpad,usbkbd,usbhid,ehci_hcd,uhci_hcd

[root@vp131147a denis]# dmesg | grep eth

eth1394: $Rev: 1247 $ Ben Collins <bcollins@debian.org>

eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)

eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host1)

eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter

eth2: network connection up using port A

eth2: network connection down

eth2: network connection up using port A

eth2: no IPv6 routers present

[root@vp131147a denis]#

[Ineu]

Имхо, самое интересное здесь:

Fakir писал(а) Wed, 23 August 2006

eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter

Почему ядро два разных устройства определяет как eth0?..

А какую сетевуху Вы вытащили? дайте вывод

cat /proc/interrupts

cat /proc/ioports

[Fakir]

[root@vp131147a denis]# cat /proc/interrupts

CPU0 CPU1

0: 259284 0 IO-APIC-edge timer

7: 0 0 IO-APIC-edge parport0

8: 1 0 IO-APIC-edge rtc

9: 1 0 IO-APIC-level acpi

14: 43021 0 IO-APIC-edge ide0

15: 119 0 IO-APIC-edge ide1

16: 20718 0 IO-APIC-level uhci_hcd:usb1, uhci_hcd:usb4, EMU10K1, nvidia

17: 9124 0 IO-APIC-level Intel ICH5

18: 14040 0 IO-APIC-level uhci_hcd:usb3, ohci1394

19: 511 0 IO-APIC-level uhci_hcd:usb2

20: 507 0 IO-APIC-level eth2

21: 3 0 IO-APIC-level ohci1394

23: 3 0 IO-APIC-level ehci_hcd:usb5

NMI: 0 0

LOC: 259193 259363

ERR: 0

MIS: 0

[root@vp131147a denis]# cat /proc/ioports

0000-001f : dma1

0020-0021 : pic1

0040-0043 : timer0

0050-0053 : timer1

0060-006f : keyboard

0070-0077 : rtc

0080-008f : dma page reg

00a0-00a1 : pic2

00c0-00df : dma2

00f0-00ff : fpu

0170-0177 : ide1

01f0-01f7 : ide0

02f8-02ff : serial

0376-0376 : ide1

0378-037a : parport0

03c0-03df : vesafb

03f6-03f6 : ide0

03f8-03ff : serial

0cf8-0cff : PCI conf1

1000-107f : 0000:00:1f.0

1000-1003 : PM1a_EVT_BLK

1004-1005 : PM1a_CNT_BLK

1008-100b : PM_TMR

1028-102f : GPE0_BLK

1080-10bf : 0000:00:1f.0

1400-141f : 0000:00:1f.3

a000-a03f : 0000:02:03.0

a000-a03f : EMU10K1

a400-a407 : 0000:02:03.1

a800-a8ff : 0000:02:09.0

a800-a8ff : sk98lin

b000-b01f : 0000:00:1d.1

b000-b01f : uhci_hcd

b400-b41f : 0000:00:1d.2

b400-b41f : uhci_hcd

b800-b81f : 0000:00:1d.3

b800-b81f : uhci_hcd

bc00-bc1f : 0000:00:1d.0

bc00-bc1f : uhci_hcd

d800-d8ff : 0000:00:1f.5

d800-d8ff : Intel ICH5

dc00-dc3f : 0000:00:1f.5

dc00-dc3f : Intel ICH5

f000-f00f : 0000:00:1f.1

f000-f007 : ide0

f008-f00f : ide1

[root@vp131147a denis]#

[SignFinder]

в /etc/modules.conf или /etc/modprobe.conf

alias eth2 блабла на alias eth0 блабла заменить

[Fakir]

Мм. Точно нчего после этого не испортится?

[Fakir]

А нечего заменять. Они одинаковы!

Вот modprobe.conf

alias eth0 sk98lin

remove snd-emu10k1 /sbin/modprobe --first-time -r --ignore-remove snd-emu10k1

install snd-emu10k1 /sbin/modprobe --first-time --ignore-install snd-emu10k1

alias sound-slot-0 snd-intel8x0

alias eth2 sk98lin

alias eth3 eth1394

install scsi_hostadapter /sbin/modprobe ata_piix; /sbin/modprobe ahci; /bin/true

alias sound-slot-1 audigy

remove snd-intel8x0 /sbin/modprobe -r snd-pcm-oss; /sbin/modprobe --first-time -r --ignore-remove snd-intel8x0

install snd-intel8x0 /sbin/modprobe --first-time --ignore-install snd-intel8x0 && { /sbin/modprobe snd-pcm-oss; /bin/true; }

install usb-interface /sbin/modprobe uhci-hcd; /sbin/modprobe ehci-hcd; /bin/true

alias eth1 eth1394

alias ieee1394-controller ohci1394

blacklist audio

blacklist snd-usb-audio

[Fakir]

Люди, что делать то?

[Ineu]

Fakir писал(а) Fri, 25 August 2006 08:35

Люди, что делать то?

Попробуйте убрать вот это:

alias eth2 sk98lin

и перегрузиться.

[Fakir]

Спасибо, помогло. Терь еще вопрос. Как вместо "пропущенного" eth2 переписать eth3. Ато возникает маленький глюк в drakonf'e.

Хотя ясно што драк- must die =)))