проблемка с VirtualBox

[MirgoN]

Вот, при запуске виртуальной машины выдает такое..

VirtualBox kernel driver not installed. The vboxdrv kernel module was either not loaded or /dev/vboxdrv was not created for some reason. Please install the virtualbox-ose-modules package for your kernel and execute '/etc/init.d/vboxdrv start' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED). Код ошибки: 0x80004005 Компонент: Console Интерфейс: IConsole {1dea5c4b-0753-4193-b909-22330f64ec45}

Ядрище 2.6.22-2-amd64

В консоли пишет

# virtualbox

WARNING: The character device /dev/vboxdrv does not exist. Please install the virtualbox-ose-modules package for your kernel. You will not be able to start VMs until this problem is fixed.

виртуалбокс-осе-модулес стоят вроде бы

[Sleeping Daemon]

MirgoN писал(а) Thu, 22 November 2007 16:02

Вот, при запуске виртуальной машины выдает такое.. VirtualBox kernel driver not installed. The vboxdrv kernel module was either not loaded or /dev/vboxdrv was not created for some reason. Please install the virtualbox-ose-modules package for your kernel and execute '/etc/init.d/vboxdrv start' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED). Код ошибки: 0x80004005 Компонент: Console Интерфейс: IConsole {1dea5c4b-0753-4193-b909-22330f64ec45} Ядрище 2.6.22-2-amd64 В консоли пишет # virtualbox WARNING: The character device /dev/vboxdrv does not exist. Please install the virtualbox-ose-modules package for your kernel. You will not be able to start VMs until this problem is fixed. виртуалбокс-осе-модулес стоят вроде бы

/etc/init.d/vboxdrv setup

Для начала.

[MirgoN]

вот, файла такого нету, но я зашел в папку и увидел похожий...

# /etc/init.d/vboxdrv setup bash: /etc/init.d/vboxdrv: Нет такого файла или каталога # /etc/init.d/vboxdrv.dpkg-new setup * Usage: /etc/init.d/vboxdrv.dpkg-new {start|stop|restart|status} # /etc/init.d/vboxdrv.dpkg-new start # /etc/init.d/vboxdrv.dpkg-new start Starting VirtualBox kernel module: vboxdrvFATAL: Module vboxdrv not found. * Modprobe vboxdrv failed. Please use 'dmesg' to find out why.

# dmesg

Linux version 2.6.22-2-amd64 (Debian 2.6.22-4) (waldi@debian.org) (gcc version 4 .1.3 20070812 (prerelease) (Debian 4.1.2-15)) #1 SMP Thu Aug 30 23:43:59 UTC 200 7 Command line: root=/dev/sda3 ro BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable) BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data) BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 262096) 1 entries of 3200 used end_pfn_map = 1048576 DMI present. ACPI: RSDP 000F96D0, 0014 (r0 ACPIAM) ACPI: RSDT 3FFD0000, 003C (r1 020807 RSDT1716 20070208 MSFT 97) ACPI: FACP 3FFD0200, 0084 (r2 020807 FACP1716 20070208 MSFT 97) ACPI: DSDT 3FFD0430, 44A0 (r1 1ADNC 1ADNCB33 B33 INTL 20051117) ACPI: FACS 3FFDE000, 0040 ACPI: APIC 3FFD0390, 005C (r1 020807 APIC1716 20070208 MSFT 97) ACPI: MCFG 3FFD03F0, 003C (r1 020807 OEMMCFG 20070208 MSFT 97) ACPI: OEMB 3FFDE040, 0071 (r1 020807 OEMB1716 20070208 MSFT 97) ACPI: HPET 3FFD48D0, 0038 (r1 020807 OEMHPET 20070208 MSFT 97) ACPI: SSDT 3FFD4910, 028A (r1 A M I POWERNOW 1 AMD 1) Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-000000003ffd0000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 262096) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-000000003ffd0000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 262096 On node 0 totalpages: 261999 DMA zone: 56 pages used for memmap DMA zone: 1019 pages reserved DMA zone: 2924 pages, LIFO batch:0 DMA32 zone: 3527 pages used for memmap DMA32 zone: 254473 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ATI board detected. Disabling timer routing over 8254. ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8300 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000 swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:bff80000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 37896 bytes of per cpu data Built 1 zonelists. Total pages: 257397 Kernel command line: root=/dev/sda3 ro Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2509.371 MHz processor. Console: colour VGA+ 80x25 Checking aperture... CPU 0: aperture @ c010000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 1023868k/1048384k available (2009k kernel code, 24128k reserved, 945k da ta, 296k init) Calibrating delay using timer specific routine.. 5145.48 BogoMIPS (lpj=10290979) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. result 12546853 Detected 12.546 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4988.09 BogoMIPS (lpj=9976198) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon 64 X2 Dual Core Processor 4800+ stepping 01 Brought up 2 CPUs migration_cost=264 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing Error attaching device data Error attaching device data ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 © Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: ACPI device : hid PNP0A03 pnp: ACPI device : hid PNP0200 pnp: ACPI device : hid PNP0B00 pnp: ACPI device : hid PNP0800 pnp: ACPI device : hid PNP0C04 pnp: ACPI device : hid PNP0700 pnp: ACPI device : hid PNP0400 pnp: ACPI device : hid PNP0103 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0303 pnp: ACPI device : hid PNP0F03 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C01 pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 32-bit timers, 14318180 Hz ACPI: RTC can wake from S4 pnp: the driver 'system' has been registered pnp: match found with the PnP device '00:08' and the driver 'system' pnp: 00:08: iomem range 0xfec00000-0xfec00fff has been reserved pnp: 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved pnp: match found with the PnP device '00:09' and the driver 'system' pnp: 00:09: iomem range 0xffb80000-0xffbfffff has been reserved pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserved pnp: match found with the PnP device '00:0c' and the driver 'system' pnp: 00:0c: ioport range 0x600-0x6df has been reserved pnp: 00:0c: ioport range 0xae0-0xaef has been reserved pnp: match found with the PnP device '00:0d' and the driver 'system' pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved pnp: match found with the PnP device '00:0e' and the driver 'system' pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved pnp: 00:0e: iomem range 0xc0000-0xcffff has been reserved pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:0e: iomem range 0x100000-0x3fffffff could not be reserved PCI: Bridge: 0000:00:02.0 IO window: d000-dfff MEM window: fc000000-feafffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:07.0 IO window: e000-efff MEM window: feb00000-febfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:14.4 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:07.0 to 64 NET: Registered protocol family 2 Time: hpet clocksource has been installed. IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 5535k freed audit: initializing netlink socket (disabled) audit(1195744683.648:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] PCI: Setting latency timer of device 0000:00:07.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.102 © Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled pnp: the driver 'serial' has been registered RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize pnp: the driver 'i8042 kbd' has been registered pnp: match found with the PnP device '00:0a' and the driver 'i8042 kbd' pnp: the driver 'i8042 aux' has been registered pnp: match found with the PnP device '00:0b' and the driver 'i8042 aux' PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 296k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: duty_cycle spans bit 4 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:13.0: irq 16, io mem 0xfbffe000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected SCSI subsystem initialized libata version 2.21 loaded. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx pnp: the driver 'ide' has been registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 ACPI: PCI Interrupt 0000:00:13.1 -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.1: irq 17, io mem 0xfbffd000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.2: irq 18, io mem 0xfbffc000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.3 -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.3: irq 17, io mem 0xfbffb000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.4: irq 18, io mem 0xfbffa000 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 3-1: new full speed USB device using ohci_hcd and address 2 r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth0: RTL8101e at 0xffffc200005f6000, 00:19:db:72:04:32, IRQ 19 ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 19, io mem 0xfbfff000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 10 ports detected ahci 0000:00:12.0: version 2.2 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit usb 3-1: new full speed USB device using ohci_hcd and address 3 usb 3-1: configuration #1 chosen from 1 choice ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: ncq ilck led clo pmp pio scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 cmd 0xffffc200005fa900 ctl 0x0000000000000000 bmdma 0x00 00000000000000 irq 22 ata2: SATA max UDMA/133 cmd 0xffffc200005fa980 ctl 0x0000000000000000 bmdma 0x00 00000000000000 irq 22 ata3: SATA max UDMA/133 cmd 0xffffc200005faa00 ctl 0x0000000000000000 bmdma 0x00 00000000000000 irq 22 ata4: SATA max UDMA/133 cmd 0xffffc200005faa80 ctl 0x0000000000000000 bmdma 0x00 00000000000000 irq 22 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: ST3160815AS, 3.AAC, max UDMA/133 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: Optiarc DVD RW AD-7173S, 1-00, max UDMA/66 ata2.00: configured for UDMA/66 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA ST3160815AS 3.AA PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7173S 1-00 PQ: 0 ANSI: 5 SB600_PATA: IDE controller at PCI slot 0000:00:14.1 ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 SB600_PATA: chipset revision 0 SB600_PATA: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:pio, hdb:pio Probing IDE interface ide0... sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. usbcore: registered new interface driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303 pl2303 3-1:1.0: pl2303 converter detected usb 3-1: pl2303 converter now attached to ttyUSB0 usbcore: registered new interface driver pl2303 drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 input: ImPS/2 Generic Wheel Mouse as /class/input/input1 pnp: the driver 'parport_pc' has been registered pnp: match found with the PnP device '00:06' and the driver 'parport_pc' parport_pc 00:06: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] input: PC Speaker as /class/input/input2 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... EXT3 FS on sda3, internal journal loop: module loaded device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. NTFS driver 2.1.28 [Flags: R/W MODULE]. NTFS volume version 3.1. NTFS-fs error (device sda5): load_system_files(): Volume is dirty. Mounting rea d-only. Run chkdsk and mount in Windows. r8169: eth0: link up r8169: eth0: link up NET: Registered protocol family 10 lo: Disabled Privacy Extensions input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PWRB] lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver eth0: no IPv6 routers present nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.23 Thu Oct 4 10:27:34 P DT 2007 hda-intel: Invalid position buffer, using LPIB read method instead.

Вот, что тут искать я не понял

[Aceler]

А какого года у вас VB и какая ОС?

[Sleeping Daemon]

/etc/init.d/vboxdrv --help

Usage: /etc/init.d/vboxdrv {start|stop|restart|status|setup}

У меня есть.

Тогда говорите какая ОС, какая версия Virtual Box.

[MirgoN]

1.5.2_ose virtualbox

debian lenny/etch

[MirgoN]

помогла переустановка виртуалбокса.. из репозиториев...

урааа!!!!!!!

[MirgoN]

Установил, запустил, поставил винду, и что, там не работает сеть, даже не пингуется...Большая машина т.е. не с виртуалки все нормлаьно по локалке путешествует и по нету... а виртуальная машина нет...

ЗЫ поставил винду... хп.. настройки знаю наизусть.... все настроил как на обычной винде... но вот проблема с некоторыми настройками сети даже пакеты не передаются...

как настроить?! помогите...

[Aceler]

В VirtualBox три типа сетевых карт, все они расписаны в документации. С каким типом проблемы?

[MirgoN]

с NAT ибо только он нормально пакетами перекидывается.

[Aceler]

Читайте документацию.

а) NAT не требует настройки.

б) NAT не умеет соединять хост-машину и гость-машину.

[MirgoN]

мне не надо их соединять, мне надо выйти в мою домашнюю локалку, это возможно? и в сеть, но это уже далее

[Aceler]

Да, возможно, если только у вас не PPPOE.

Настройте сеть как NAT и под виндой настройте ее по DHCP.

Идите.

[AccessD]

Цитата:

мне надо выйти в мою домашнюю локалку, это возможно?

да. если не ошибаюсь, для этого на хосте настраивается бридж.

[MirgoN]

У меня роутер... у нему 4 компа... от него уже PPPOE

я дхцп сервер отключил на роутере...я настроил ему фиксированный айпишник...

Сейчас попробую ещё пару раз

[Aceler]

MirgoN писал(а) Fri, 23 November 2007 00:22

я дхцп сервер отключил на роутере...я настроил ему фиксированный айпишник...

Не имеет значения - у VirtualBox собственный DHCP сервер.

Читайте документацию.

[MirgoN]

простите

ушел читать документацию... попытается найти там, что нужно

[MirgoN]

ещё один вопрос, а если линь не видит ирду, а вставляю её под виртуалбоксом, ведь тоже не увидит?

[Devil]

The VirtualBox kernel driver is not accessible to the current user. Make sure that the user has write permissions for /dev/vboxdrv by adding them to the vboxusers groups. You will need to logout for the change to take effect..
VBox status code: -1909 (VERR_VM_DRIVER_NOT_ACCESSIBLE).


Код ошибки: 
0x80004005
Компонент: 
Console
Интерфейс: 
IConsole {1dea5c4b-0753-4193-b909-22330f64ec45}

 

от чего это?
ubuntu 7.0.4
ядро последней версии!!!

[Byte]

Он же говорит: добавить пользователя в vboxusers группу

[Devil]

Тогда как это сделать?

[Ineu]

man gpasswd